OP

Quoted from desertT1:

Hello all. Had to take a break for an intensive class load, but I am back to working on this project.
Skybug; I actually don't have a lock for the coin door on mine, but do have a lock on the rear panel. I have two keys and they are identical, so I will guess that yours will work for both the front and the back.
Chrisbee; Where is the delay relay? I just did a bulb count for an upcoming order and only saw 44/47's and some N55's.
That brings me to my next point, what are N55's? Are they just a 55w version of a 44/47, because they fit in the same socket. There are two different sizes of plastic inserts on the PF, but if I can use all one type of bulb, I would like to. Say what you will, but after seeing burn marks at every bulb location, I'm going LED.
Here is the latest progress. The backglass was rough in some areas, but my fear has been reduced after several layers of Krylon Triple Thick.

OP

Quoted from desertT1:

I'm not looking forward to all the black border,

OP

Quoted from desertT1:

Thanks. Is that for covering it up, or creating the border so I can paint the thin stripes?