You're currently viewing posts by Pinsider Alan_L.
Click here to go back to viewing the entire thread.
The flipper crank is made of softer metal than the set screw. Tightening the set screw strips out the threads in the crank. Very common with early Bally. Replace the crank and set screw. If you haven't already rebuilt the flippers, you probably have worn bushings, weak springs and worn out EOS switches. Order the flipper kit from Pinball Resource, Marco or whoever.
You're currently viewing posts by Pinsider Alan_L.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-flipper-crank-loosening?tu=Alan_L and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Jarrettsville, MD