The other blue yellow wire ends up being the lane change on centaur. "Probably" the same on fathom too. I would check the re-do the wiring to that specific socket. Bad eyelet, bad crimp, oxadized wire. Any of that can raise resistance
You're currently viewing posts by Pinsider tallon.
Click here to go back to viewing the entire thread.
The other blue yellow wire ends up being the lane change on centaur. "Probably" the same on fathom too. I would check the re-do the wiring to that specific socket. Bad eyelet, bad crimp, oxadized wire. Any of that can raise resistance
Run a fresh wire from j2-15 on the lamp board and connect the lamp with a known good wire. See if it blows the 5060 with that
You're currently viewing posts by Pinsider tallon.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-fathom-right-saucer-arrow-lamp-problem?tu=tallon and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.