Photo: robin
  1. » Forum
  2. » Electro-Mechanical
  3. » EM Pinball Tech
  4. » Bally EM 00-90 Match Unit - Torn Down, Analyzed, and Demystified
(Topic ID: 258086)

Bally EM 00-90 Match Unit - Torn Down, Analyzed, and Demystified

By xsvtoys

4 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

Topic Image Gallery

Hiding images with 1 or more NSFW tags (Show all images)
Click here to change your NSFW threshold.

There have been 51 images uploaded to this topic.

Back to topic


Bally 00-90 Match Units (resized).jpg
Snap-Out Score Counter Unit (resized).jpg
Snap-Out Score Counter Unit as 00-90 (resized).jpg
backbox inside (resized).jpg
backbox hole cover Bon Voyage 1 (resized).jpg
4 mounting screws (resized).jpg
8 nut and bolt gauge (resized).jpg
6 mounting screws removed and stored (resized).jpg
7 handling the unit (resized).jpg
9 ready to remove right pcb labeled (resized).jpg
10 right pcb removed (resized).jpg
11 internal workings (resized).jpg
match unit 1c.gif
12 hold pawl spring removed (resized).jpg
13 ratchet spring removed (resized).jpg
14 stop plate view labeled (resized).jpg
15 stop plate removed (resized).jpg
16 coil bracket removed (resized).jpg
17 drive pawl assy removed prep (resized).jpg
17 drive pawl assy removed (resized).jpg
18 ratchet removed (resized).jpg
base plate with hold pawl dissassembled (resized).jpg
00-90 unit 9 ratchet dirty 1 (resized).jpg
00-90 unit 9 ratchet dirty 2 (resized).jpg
ratchet assy dirty dissassembled front (resized).jpg
ratchet assy dirty dissassembled back (resized).jpg
ratchet front cleaned (resized).jpg
ratchet back cleaned (resized).jpg
00-90 unit 7 drive pawl and plunger removed and dirty (resized).jpg
drive pawl assy cleaned (resized).jpg
hold pawl cleaned 2 (resized).jpg
base plate front cleaned (resized).jpg
00-90 unit 8 ratchet removal 2 (resized).jpg
00-90 unit coil sleeve comparison (resized).jpg
coil sleeve shortened (resized).jpg
18 ratchet removed (resized).jpg
1 hold pawl installed (resized).jpg
2 ratchet front wiper attached (resized).jpg
2 ratchet rear wiper attached (resized).jpg
5 left PCB mounted (resized).jpg
6 ratchet and drive pawl installed (resized).jpg
7 stop plate installed (resized).jpg
8 springs installed (resized).jpg
9 right pcb installed (resized).jpg
9 right pcb installed 2 (resized).jpg
00-90 unit left 1 (resized).jpg
00-90 unit right 3 (resized).jpg
00-90 unit right 4 (resized).jpg
match unit 2b.gif
20200805_115904 (resized).jpg
20200805_115912 (resized).jpg

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/bally-em-00-90-match-unit-torn-down-analyzed-and-demystified?gallery and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.