I have been replacing all the board connectors on my EK while I have plenty of spare time. After replacing all of them, everything worked good except for the far right number on each display won’t light up. I tried changing the lamp driver board and have the same problem. Seems odd that all the numbers light up but one on each display. Any ideas? Thanks

I have put in all new boards over the past year. Was redoing the connectors since all the pins were new. I’ll check out what u sent. Thanks

Thanks for the help guys. I must have done something wrong on that crimp. I’ll check it when I get home and report back. I removed the connectors from each display one at a time per Kupla and that didn’t fix it.

You guys are great. I cut off the crimp terminal I put on J1-1 on the MPU yesterday and installed a new one, problem solved. Thanks again.