I have a Bally EBD, and up until yesterday everything worked fine. No power now at the Right flipper. Both left flippers work correctly, and show 43 volts at the coil when the button is pressed. Absolutely nothing on the right flipper.

I checked EOS switches, they are closed and there is continuity to the coil lugs.

I checked the diodes, there is continuity through each diode.

I understand this power comes off the fuse and goes directly to all 3 flippers with a common wire.

Anything I'm missing? The coil looks fine, no broken wires,.. even if the coil was bad there should still be power at the coil?

I cleaned all EOS and cabinet switches, and checked continuity.

No problems.

What am I missing?

Does this relay control each flipper individually?

Are you in Mobile? I'm from Pensacola currently in Alaska (with military), but Pensacola is my home. I see you have quite the game list... are they private or do you route them?

Is yours the Gorgar that's on Craigslist? Good overall list of games... I'd like to know where to play them when I'm back in the area.

I have Getaway, T2, F14, EBD... many more coming for my private collection. I'm looking for Firepower, Space Shuttle, Tommy, NFL (stern) and a couple others. It's addicting.

Thanks for any info!

How to test this or know?

Bad solder joint... that was it. Thanks!

Hopefully you can get your games back together.

Are you a member of the Facebook page for the gulf coast club? I found that recently. Can't wait to return and do some pin-networking.
Jamie

I'm getting better at reading schematics, but I'm not there yet. Thanks.