Just curious if this would be a good sub for the original 1n5275a since it's obsolete. I know it has a higher wattage but this seem's like a potential sub
You're currently viewing posts by Pinsider Drewscruis.
Click here to go back to viewing the entire thread.
Just curious if this would be a good sub for the original 1n5275a since it's obsolete. I know it has a higher wattage but this seem's like a potential sub
Quoted from Quench:Yes, those Z4KE140A zeners are what I use.
BTW, you can still get 1N5275B (tighter tolerance) but they are expensive.
Yeah, I saw those. But I think the cheapest was $5 or $7. These were .36 cents each.
Quoted from Quench:I like that you've used red and black wires for the C23 electrolytic capacitor - that's what I always do.
BTW, what's the voltage rating on those two replacement green polyester capacitors at C27 and C28?
This was a kit I got from big daddy enterprise, said they are supposed the be rated for 630v on th kit, but now I'm doubting that.
You're currently viewing posts by Pinsider Drewscruis.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-display-140v-zener-1n5275a-substitution?tu=Drewscruis and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.