(Topic ID: 213404)
Montvale, NJ
Here is the road show schematic I am looking to compare against. The value listed for R13 and R27 in the road show manual is 5.5K Ohm at 5W - which is wrong - the board actually has a 5 Watt, 5.6 Ohm at 5% resistor installed. Based on the pic in my first post, I would guess the values for the corvette board are 5 Watt at 5 Ohm - can anyone confirm value or compatibility with Road Show?
Road Show Dual H Schematic (resized).jpg
IMG_2614 (resized).JPG
If the boards are the same part number, then they are compatible. Let 'er rip.
--
Chris Hibler - CARGPB #31
http://www.ChrisHiblerPinball.com/Contact
http://www.PinWiki.com - The Place to go for Pinball Repair Info
1 year later
Chris, can you repair these boards? I’ve got one that will run one motor but not the other. If you swap motor connections the other motor does run. Something in that board putting power out to one motor connector but not the other. Thanks! Mìke
Quoted from ChrisHibler:If the boards are the same part number, then they are compatible. Let 'er rip.
--
Chris Hibler - CARGPB #31
http://www.ChrisHiblerPinball.com/Contact
http://www.PinWiki.com - The Place to go for Pinball Repair Info
Quoted from MikeSinMD:Chris, can you repair these boards? I’ve got one that will run one motor but not the other. If you swap motor connections the other motor does run. Something in that board putting power out to one motor connector but not the other. Thanks! Mìke
Yes sir. I can.
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
http://www.PinWiki.com/ - The new place for pinball repair info
Promoted items from Pinside Marketplace and Pinside Shops!
Etten-leur, NB
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
