Quoted from zeiram:It was there when I started working on it and never had an issue from it until lately. I will replace it with a normal fuse holder. The fuse blows by the way but it still melts the holder. 15 amp fast blow fuse used as labeled on Schematic. I have already replaced it twice with the automotive one.
Quoted from RWH:That sounds like a dead short to me. I'd check all the wiring harnesses especially anywhere they may be soldered. Also all the soldered points on every board, pop bumper etc.. Possible you may just have something laying across lugs or wires and grounding them out.
Yep.