Centaur
Bally, 1981You're currently viewing posts by Pinsider dothedoo.
Click here to go back to viewing the entire thread.
Quoted from meSz:As for the switches for the balls, the picture below shows the switches. There are a total of 4 balls in the multi ball cradle and one ball that stays up above???
That is correct. The fifth ball always stays in the outhole and a diverter sends it over the ball trough to the plunger.
Quoted from meSz:The machine boots up but there is no sound
Count the flashes on the squawk and talk board when booting up. You should see at least 4, probably 5, flashes for successful boot. If you get that then check power. The board needs -12V I believe for the amp.
Quoted from meSz:Okay I get 5 flashes and also the machine says "Centaur" upon starting the game. Once the game is started there is no background sound/music.
Go into self-test settings and make sure #18 is set to '03'
You're currently viewing posts by Pinsider dothedoo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-centaur-help-needed?tu=dothedoo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
West Chicago, IL
Zemst