I got an instructional video by " Richard Gerlitz",
it is GREAT!!!
Terry K
You're currently viewing posts by Pinsider terry1.
Click here to go back to viewing the entire thread.
Correction on my previous post!!!
I place my "lift" under the box, at the head end of my machine, NOT
under the head!!!
I see you are missing a trough switch cover/plate.
I was missing one as well.
I wanted to get one so the coin box would not bang into the switches!!
Good luck. Lots of help on this site, BELIEVE ME!!!!
Terry K
I used Mothers, California Gold,
Carnauba Cleaner wax
Nice finish.
To me, a well finished play field covered with a
good fitting glass, should last almost forever;
especially since it probably would not get the play it
would have seen in the past!!
Terry K
BTW, Merry Christmas to all and have a great New Year!!!
Look on Phil's site, you will see the four red posts with black rubbers.
All the rest are yellow with white rubbers.
Be careful pulling out the spring posts, and light shield bounce spring posts.
The wood can splinter.
The things that look like nails are, on can be finish nails with the hammer ends
clipped off.
Make sure when putting the nails back in that you don't hammer them in
to far. The shutter/ball board, that releases the balls, is close to the underneath if the
play field.
I used chrome/stainless finish nails.
I made a little spacer so I couldn't hammer them in to far!!
The rebound spring(s) in front of the light shields are fixed(sort of) to the posts.
If you are going the clean up the above mentioned spring/posts with a wire brush on a
grinding wheel, be very careful.I am still looking for one of the rebound springs
Terry K
You're currently viewing posts by Pinsider terry1.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-bingo-laguna-beach?tu=terry1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.