Fathom
Bally, 1981You're currently viewing posts by Pinsider DennisT.
Click here to go back to viewing the entire thread.
One thing that gets over looked that you might check. It’s the voltage tap setting on the main transformer. I believe from the factory their set for 115 volts which was normal back in the day. Now you can see readings from 120 to 125 volts. I would change it to the 120 volt tap if it hasn’t been done yet. It will also help lower the secondary voltages back to where they should be.
You're currently viewing posts by Pinsider DennisT.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-as2518-54-rebuild-questions?tu=DennisT and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
San Jose, CA
Zemst