Got a xenon, I'm in, if you'll let me. Like sunking, most boards were replaced with allteck and rottendog. Still got the original sound and aux light boards - does that count?
You're currently viewing posts by Pinsider wolf.
Click here to go back to viewing the entire thread.
Got a xenon, I'm in, if you'll let me. Like sunking, most boards were replaced with allteck and rottendog. Still got the original sound and aux light boards - does that count?
Hey mof, I'm not a tech by any means but do manage to keep my bally alive. The manual will say what value the fuse is. For F2 it is a 3/4A fast acting, it generally will say SB for slo-blo fuses. As far as the voltages, they all have a tolerance, + / - volt value. The only way I know to change any voltage is to change jumpers on the power supply for 110v, 115v, 120v etc. Hope this helps. Somewhere here Vid has a piece on bullet proofing these, and it's pretty thorough on the voltages and variances, and most anything else you need to address.
You're currently viewing posts by Pinsider wolf.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-as-2518-club?tu=wolf and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.