Replace fuse F4 with a 5 A fast blow. Your non-flipper solenoids are dead.
You're currently viewing posts by Pinsider drjoe.
Click here to go back to viewing the entire thread.
Just shim the area with something to raise the targets to the right height when they are down. Just about anything will work. This is common when a playfield is clear-coated.
Check the solenoids on the game to make sure one didn't lock on and short and check for the diodes to be attached on the coils.
The game won't boot without the 43 volts coming through F4. Check test point 5 for +43 volts give or take.
Could be a fried coil on the game, could be the BR3, or a few other things.
You're currently viewing posts by Pinsider drjoe.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-as-2518-club?tu=drjoe and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.