Quick question...Would a Bally AS-2518-35 board be usable in a machine that came originally with an AS-2518-17? If so, is it an easy replacement, or is there much work involoved?
You're currently viewing posts by Pinsider EEE.
Click here to go back to viewing the entire thread.
Quick question...Would a Bally AS-2518-35 board be usable in a machine that came originally with an AS-2518-17? If so, is it an easy replacement, or is there much work involoved?
I need a quick comparison. This is a globe trotters machine.
I have a pair of loose green wires I’m trying to determine if they have any use. Inside the cabinet near the incoming power cord connection.
Are they supposed to have a similar wire nut as seen on the black and white? Perhaps a ground wire?
The machine boots up so they may be for other electrical outlets.
2771D3B0-55DD-4D09-80AC-36E5D3568013 (resized).jpeg929E11A9-33AC-4C44-85E3-5300B3D5DB04 (resized).jpeg
Added over 3 years ago:This is what a factory QC miss looks like. The incoming line cord was never screwed onto the ground braid.
Thanks Jardine & Mathazar!
Do any of you folks have a good working solenoid driver board? It looks like I may need one.
I’m putting the final touches on the top side of a Harlem Globetrotters playfield swap. The first picture is from the local CL ad.
It has a perfect original backglass and solid cabinet.
I swapped in a clear coated playfield from Ballylama, plus apron cards and spinner decals from Upkick Pinball. I used solder tabs and ran a whole new under-playfield braid with corresponding colored wire bought from the local Ace hardware store.
I still have a few coils to replace and some board work to finish up.
I did run the harness through the dishwasher and had great results.
19CB2FF4-AD08-417F-8DD5-379058ABF0F0 (resized).jpeg
2843A94F-B571-4563-8D1B-1C36814F3365 (resized).jpeg4BBCAD70-7CC2-4F26-A433-FB7AB0E369CC (resized).jpeg
3982C53A-938C-4672-8628-EC722F47D289 (resized).jpegE37F6F03-D33F-4B92-9854-B3A510EA888C (resized).jpeg
Quoted from Mathazar:What tool(s) and/or method(s) do you guys use to cut down a connector plug housing? I've got a ton of 15 and 20 pin .0156" connectors but need to replace an 18 pin one. I ordered some 18 pinners this afternoon to stock up on but if I can trim down one of my 20 pin connectors and not have it look like a total hack job, I can finish this re-pinning tonight. Thanx!
I use a box cutter or utility blade to score what will become the outside edge of my smaller connector. Then I snap that section off and clean up whatever isn’t flush on the edge.
Selling a few Bally items from parts bin.
Make a reasonable offer plus shipping via usps. I’ll include four plastic nail glides in each package, I have way too many of these things as well!
Bally transformer cage with related screws =SOLD
Bally Playboy grotto overlay
Bally backglass metal lift channel and plastic trim pieces (from a Fathom?)
Bally Medusa playfield window
Bally Paragon shooter lane cover =SOLD
Not Bally stuff, but too lazy at the moment to make posts over there.
Williams Bally lockdown latch pieces
The following are free, just cover shipping:
Gottlieb Genie (system 1) power supply board bracket
Gottlieb paperwork
21A3C41D-285A-4866-AB10-E7D8CEE1F76E (resized).jpeg3C45F127-EC95-446F-A3AB-DC857D1D4E47 (resized).jpeg5A88CB2D-0C19-4F52-A6BC-B1E7DA59F4E7 (resized).jpeg741320F4-5C57-428C-A1B4-0CFE31EF9D32 (resized).jpeg393C8567-3857-4C06-B1B5-90F796B0BD0D (resized).jpegB13B2BAA-3B81-42A6-91E4-A7763C5CCFCB (resized).jpegC0269E75-9352-4E3C-8A8E-411A0EDCDE56 (resized).jpeg884F7D79-DA90-41E3-BB06-FE3BFC7226AE (resized).jpegBC73D8CB-1085-4FE2-9FC2-277E77693CF3 (resized).jpeg2A0AA43A-F0DA-4C78-A8CC-B4B339D40B86 (resized).jpegFE48D741-5A7C-410F-84A9-A42D8E4D7F29 (resized).jpeg62FDA5D2-E419-4AA6-96FD-CA6E297AA532 (resized).jpeg
6568DF09-E67B-48AB-9FE3-5E27CA4A17B6 (resized).jpegAD24F920-1232-40EF-BA29-72B20101A675 (resized).jpeg
Medusa playfield window sold
Added 13 months ago:Grotto overlay sold
You're currently viewing posts by Pinsider EEE.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-as-2518-club?tu=EEE and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.