Hi guys and gals, just joined the club with my first Bally, a Lost World. of course have some questions.

So, everythign works and plays, but the feature lights (inserts etc) are much dimmer than the GI. reading pinwiki and techniek.flipperwinkel.nl and here leads to testing of the rectifier board and testing voltages on TP1 through TP5 as such:

TP1 3.2vdc (low)
TP2 237vdc
TP3 13.6vdc
TP4 6.7vac
TP5 44.5vdc

So the only one that seems totally off is TP1 reading low which not surprising is what feeds the dim feature lights. So before I start ordering stuff is there a recommended kit for repairing? or is it easier/more effiecient to by a replacement from nvram.weebly.com? Anything else I should look at while I'm at it?

because.. pictures.

IMG_20191015_061632 (resized).jpg

IMG_20191015_170203 (resized).jpg

The mermaid edition says it's all RGB lights, so I expect those colors to change during gameplay or be selectable or something.

these?

pasted_image (resized).png

nah, don't like those I like wire leads

I believe it's resting on the bottom of the body, so does light it up

what I mean is the pcb is sitting on the bottom of the pop bumper body, so the light on top lights it up