Mata Hari
Bally, 1978You're currently viewing posts by Pinsider quench.
Click here to go back to viewing the entire thread.
Quoted from ChrisHibler:2. Black on pin 1.
3. "rake" pins 2 - 22 with the red probe. There should be no "chirps" of continuity.
4. Move Black to pin 2.
5. "rake" pins 3 - 22 with the red probe. Again...no chirps.
I do the same thing but with an analog multi-meter and watch how fast the needle moves.
To the OP, look at whether installing the 5101 is upsetting the reset signal.
Since you've used SIP sockets, put the board up to a bright light and look for solder shorts between pins/traces.
You're currently viewing posts by Pinsider quench.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-as-2518-17-mpu-issue?tu=quench and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fredericksburg, VA