Escape from the Lost World
Bally, 1987Hi guys,
On my escape from the lost world, the bottom right flipper coil burned.
Changed it, along with the eos switches; it is now rattling.
It looks like the "low power mode" of the flipper is not engaging.
Is there any transistor controlling it that might have burned with the previous coil?
No. The flippers are directly connected via the relay. Double check your new coil is wired in correctly and that the wires for the hold coil aren't busted by tugging gently on them.
Quoted from Nihonmasa:Hi guys,
On my escape from the lost world, the bottom right flipper coil burned.
Changed it, along with the eos switches; it is now rattling.
It looks like the "low power mode" of the flipper is not engaging.
Is there any transistor controlling it that might have burned with the previous coil?
The flippers are still the old style manual operation.
They are still like the classic Bally's only the coil values have changed.
The holding windings still have the propensity to break... causing the
" machine gun " effect.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-6803-flipper-mech-question and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chénens
Wichita, KS