Hey Mick see if you can post a few photos of the boards ,
some of the members are pretty sharp and may see something not right
you would be surprised how much a photo helps
You're currently viewing posts by Pinsider hellodeadcity.
Click here to go back to viewing the entire thread.
Hey Mick see if you can post a few photos of the boards ,
some of the members are pretty sharp and may see something not right
you would be surprised how much a photo helps
also this may sound too simple but check the line cord that plugs into the wall outlet
as well as the outlet
replace the power cord Mick.
I think the green wire on the coin door photo goes to the coil below it,
it's common to have the signal wire cut to stop the loud buzz that sometimes develops over the years on those relays - not a big deal on the home front.
That coils job is to give back a coin whenever a coin drop on a pin with no power or off,
when it's on the coil pulls in and coins are directed to the coin mech. /acceptors
You're currently viewing posts by Pinsider hellodeadcity.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bally-1978-power-play-pinball-keeps-blowing-fuse?tu=hellodeadcity and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.