The transformer on my 1970 Bally Big Valley has no output voltage that I can find.
I verified 120 volts on the input side but 0 volts on all output tabs.
Checking the 120 volts I used the mains ground wire (-) and the lower transformer lugs (+) and for the output tabs I used the upper common lug (-) and the 6V and 50V lugs (+).
From the looks of all the output cut wires the previous owner cut I think they had the problem and gave up.
From what the Pinrepair guides say a transformer is never bad.
Is there any other conclusion that can be made?
Thanks.