Hi. I have a Bad cats im restoring and have two questions that I need help on.

First... When I coin up the game all the drop targets reset, great, but when any or all of the 5 drop targets drop they give no points and don't reset until game is coined up again.

Second.... My seafood wheel just twitches will not turn. I have bought a new williams stepper motor installed it and it did the same as the motor that was in it. I even just but the motor in my hand and did a wheel test, no shaft spinning. Also the motor seems to bind when energized.

Any help would be greatly appreciated.

Thanks. Im going to pull the interconnector board out later today and check for cold solder joints. Also, I did notice one of the 3 pin connector on the interconnector board seemed to conect very loosely.

UPDATE. The 5 tagets are fixed, it was the 3 pin connector on the interconnector board. Thanks folks

I'm going now to trace the wires back on the stepper motor to see if I can get it to spin.... Zaza... Thanks for the tip...