Quoted from PinballFever:I slowly and carefully removed the wrap.
The bottom half is good. The top half has some bubbles around a half inch or so in diameter underneath the triple thick.
Do you suggest puncturing the bubbles with a pin to let the air out then spraying a couple more coats?
Thanks,
Bruce
I'm not the expert on back glass repair but if you leave a bubble underneath the lifting paint and the TT you still have an area with no paint or ink adhesion so you are left with a bubble which can spread. I just sold a Bally that someone had done TT to a long time ago. There was a bubbled area that was completely blown out.