Baby Pac-Man
Bally, 1982You're currently viewing posts by Pinsider eabundy.
Click here to go back to viewing the entire thread.
Game booted once, but on my second try does not start up. Has a new rottendog rectifier board, and altek CPU. I get the PacMan test music, but nothing on the screen. When I press the SW1 test switch I get the color bars on the monitor. The altek CPU shows me I think 3 LED flashes.
The Rectifier board is showing power to only 2 LEDs.
OK replaced the 43v Fuse under the playfield even though fuse tested good with meter. Game worked once. Game is doing same thing fuse tests fine. I have tested voltage at the 43v fuse both sides have the correct reading. However at the Alltek test point it does NOT have voltage for 43v. Also the other 2 fuses under the playfield have no voltage. Not sure if that's an issue yet or not.
You're currently viewing posts by Pinsider eabundy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/baby-pacman-not-booting?tu=eabundy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
