got anothee baby pacman head scratcher game was working fine then turned it on today and left flipper is out. the solonoid is fine i can jump it off the other flipper and just to be sure i changed the diodes also.
i checked connectivity from all the wires on the solonoid as well as on the flipper buttons back to the board and theyre all connected.. reflowed solder where i could just to be sure and neither of the buttons will trigger the solonoid
where would i look next? driver board? mpu?
to clarify on the flipper buttons i checked connectivity back to the driver board. on the solonoid i checked connectivity of the green wire back to the driver board and one brown wire down to the rectifier board and the other one over to the 1a fuse.
the loop of the right prong on the solonoid that has all three wire is broken but i was still able to get a good connection onto the solonoid soni dont think that its but open to suggestions..
thanks for your input!!
7E30D55E-D7DE-40F2-9E60-89A93905A99A (resized).jpegCE5802F6-BF13-4607-AEDB-E6349645CA56 (resized).jpegF7CFCA4A-A747-41A0-93E5-A43946345448 (resized).jpeg