Had this machine about 10 years, but now it's time to pass it on. Still in very nice condition, clean, and 100% playable.
Looking to sell, but may consider a trade depending on the offer.
Playfield still has factory mylar. There's a little spot of wear near right-most drop target. Otherwise looks bright and beautiful.
Video display is gorgeous. Sharp picture, great colors and deep black.
Coin mech works. Tilt works.
There's a shim that is adding some pressure to the side of the monitor chassis. It's a wooden spoon, actually — gotta love creative solutions. If you remove the shim, the monitor loses power. I'm guessing that there's a cold solder joint on a monitor board that needs reflowing. Sounds simple enough, but I never got around to fixing it.
As usual for this machine, there was acid damage on the MPU board. The board was removed, cleaned, repaired, and a remote battery holder was added. Board may look a little rough, but works fine.
IMG_5115.jpg
IMG_5117.jpg
IMG_5119.jpg
IMG_5121.JPG
IMG_5123.JPG
IMG_5125.JPG
IMG_5129.JPG
IMG_5137.JPG
IMG_5143.jpg
IMG_5145.jpg
IMG_5146.jpg
IMG_5149.jpg
Post edited by cheezywhiz: sold