Rick and Morty (Blood Sucker Edition)
Spooky Pinball, 2020
Rick and Morty (Standard)
Spooky Pinball, 2020You're currently viewing posts by Pinsider ninjedi.
Click here to go back to viewing the entire thread.
#385 shipped!!! Should be fun to play over Christmas!
Might arrive in a couple days... so 1 year and 1 day of waiting!
Thanks for the Spooky crew for getting their weekly quotas up... I was thinking it would be in the new year after the covid shutdown.
Quoted from Soulstoner:When was your invoice issued?
Dec 1.
Quoted from Coyohtay:maybe, I did not get butter
me neither
Quoted from harryhoudini:My right flipper was binding. The gap between the bushing and the flipper (where the flipper spacer tool would go) was about 1/4" travel versus left with 1/8" or so. I reduced the gap, changed the alignment to not be so far from the alignment hole and set the flipper power to 35. I can hit the left ramp every time now. Oh man, game changer.
The plungers on each flipper look drastically different. I'm gonna swap the sleeves and clean out the dust and see how the plunger looks full length. What do you experts have to say about the inconsistent wear? Completely related to the excess gap? [quoted image]
I noticed this on my machine when I first went over it (received it yesterday), and then saw it in your picture. The left flipper mech hits the EOS switch. On mine it seems that when the playfield is down, it doesn't affect it too much, but when it is up, the flipper mech and bolt head catches the switch and can bend it. This might unadjust the EOS if you are working on the machine and don't notice it.
I'm thinking of snipping a small bit of the end of the EOS switch off, so it only hits where it should.
Screen Shot 2020-12-17 at 8.57.28 AM (resized).jpgQuoted from PinMonk:So there are now 3 and 4 flipper spooky flipper cooling kits in the pinmonk store. I will make add-on kits available shortly for anyone that bought a 2 flipper kit already and wants to upgrade to the 3 flipper setup. With all three fans connected, the kit draws 6/10ths of 1 amp, so very small power draw.
I don't see 3 flipper cooling kits on your store.
Quoted from brerspidur:You have to go to the spooky fan section, and then there are options for 2, 3. And 4
Have a link? I don't see a spooky fan section... search doesn't bring up any 3 or 4 options, neither does the R&M section.
Quoted from TheNoTrashCougar:Also check to make sure the flipper bat shaft is not gouged. If it is, it will want to go back to the position it was originally in.
--Scott
if it is gouged, you should be able to swap left and right bat shafts so that you have a new place to tighten up against.
You're currently viewing posts by Pinsider ninjedi.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aw-jeez-official-rick-and-morty-club?tu=ninjedi and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Grimsby, ON
Bend, OR