Jacksonville, FL
I've been working on dialing in number 51. I finally got it where I really like it but I noticed a couple of things that I thought were worth mentioning here.
Number one was my drop targets kept triple tapping when they reset. I could hear them pop two or three times. Lifting the Playfield I saw that the actuators on the drop Target switches we're just a little too long. The tab that lifts the drop Target was catching them as it dropped back down and causing the switch to activate two or three times before settling down. I didn't want to take everything apart and trim it. So I just slightly bent the switch back so the tab would not catch it anymore. Now they are working quite nicely.
The other thing I read was some people have mentioned they're pop bumper falling apart. I took a look at it. Is there a reason there are three washers above the pop bumper links? It takes up enough of the threads that the nylock nuts can not engage the nyliner so are not locked onto the threads of the pop bumper ring. I could take a couple the washers off but wanted to ask if there was actually a reason for it before getting into it.
I really enjoy this game. Never liked working on spooky games before this but they really have done a good job.
Bill
Jacksonvillepinballrepair.com
20201002_202836 (resized).jpg20201002_202955 (resized).jpg20201002_203009_HDR (resized).jpg
