(Topic ID: 257850)
Linked Games
Rick and Morty (Blood Sucker Edition)
Spooky Pinball, 2020-
Rick and Morty (Standard)
Spooky Pinball, 2020
Topic Gallery
You're currently viewing posts by Pinsider alamo_pin.
Click here to go back to viewing the entire thread.
San Antonio, TX
4 weeks later
Quoted from ovfdfireman:Thanks for the mention, keep in mind folks this is enough to do approximately 3 games. So for about $6.65 a game seems like the least expensive thing out these days!
Do you just apply one strip to the top of the glass or is there some other way to install it?
1 month later
Quoted from Chisox:It’s been a while but I thought it was build sheet-2 weeks payment-2 weeks delivery.
That’s what it was for mine.
3 months later
Quoted from darkryder:The glass on my new BSE rattles like crazy. Does anti-rattle tape mostly solve this? The shaker also sounds like a bucket of bolts and feels extremely harsh. Anyone else make adjustments to quiet down and smooth things out on this game? The shots are also super clunky like Alice. I can tell I’m going to have to do some tweaking on this game to get it dialed in. The code, callouts, animations, lighting and sound are brilliant. It just feels very rattly and clunky based on the first few games played on it. I did order those x brace spacers, so hopefully that helps improve the flippers some.
Rattle tape solved my vibration problem 99%. You may need to make some flipper adjustments—I would say this shoots much better than ACNC once you get the feel of where the shots are.
2 weeks later
A little help needed on the magna save magnet. I installed Aniraf’s spacers which made a huge difference in my ability to hit the upper loop and garage shot. But now my magnet is not working.
Pressing the flipper still drains the juice and it still makes the same noise, but there’s no longer any magnetism bringing the ball back from the outlane.
I must have loosened a connection or wire somewhere, but everything looks good. Does anyone have any ideas on what I should check?
4 months later
Quoted from Deadlander:Lost my anti gravity magnet. Switches work shaker motor reacts when pressed but no magnet. Checked magnet in self test and nothing. What next to check?
Thanks,
Al
Did you get this issue solved? I have the exact same problem. My magnet stopped working right after I installed the flipper spacers, so I figured I must have caused a wire to come loose. But I still can't solve the issue.
1 week later
Quoted from Deadlander:Fixed problem after checking continuity on both sides of the z connector we found that one of the idc connectors was broken reset wire and bingo we had a working magnet. Good thing I didn’t buy a new magnet. Really hate those connectors tempted to switch to a Molex connector or just solder them together.
Would you mind taking a pic of the connectors and posting it? I’m hopeful that will fix my problem, too.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider alamo_pin.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
