I am running a 2020 code and spookys link doesn’t work. Is this the most recent code?
You're currently viewing posts by Pinsider Happy81724.
Click here to go back to viewing the entire thread.
Quoted from PlanetExpress:Yup, just loaded it on mine last weekend. That site is where the link on Spooky’s site leads.
Cool, this is what I keep getting on the spooky site but I started downloading from the link I found in this forum
07BE828A-BE2C-454D-86D3-1BE6743449DD (resized).pngI haven’t got a lot of games on the pin but we are really enjoying it. I have never used the third flipper button. Is that for a mode?
Quoted from Rum-Z:That's your magnasave button, to try to keep balls from going out the right outlane.
Ah, ok, so like black knight. Thanks!
Quoted from Jakers:Happy81724 plays my Rick and Morty one time. Two weeks later....owns one. It must be a good game. lol
Yeah, it’s a lot of fun and I took off swearing so the kiddos actually like it a lot. It’s probably the funniest pin we’ve played
Quoted from Happy81724:I figured out the meter ribbon but the one to the back box/speaker lights When I tried to hook to the bottom power it wouldn’t boot the game. Anyone have a pic of their lower right power supply?
[quoted image]
I got it working thanks to help from @jakers! Much appreciated
Quoted from wackenhut:Anyone had to change out the topper motor? What is involved?
Also, regarding the glass rattle, I know the recommendation is to put the anti-rattle tape around the glass, but it seems to be tight enough on the sides. Might be a stupid question, but how can you tell what area needs to be tighter besides trial and error with tape. It seems like the culprit would be at the head and bottom lock bar.
I’ve been doing the zip ties. Cutting the top off them where the tie goes through so it’s just a flat piece of plastic. Then you push it under the plastic that holds the glass. About three go the length of the rail. It works really well
Quoted from dsmoke1986:Just joined the club, WOW. This pin is amazing!!
I wasn’t expecting it to be this good. Will post a review after I get a good 100 games or so in.
Yeah, I just got it Wednesday and it’s pretty amazing with the code. It should be a top 10 all time pin
Quoted from MJK-911:Spooky tech support responded this morning in an email, they told me iam running out of RAM !!! Several features were put into the game that were never tested. WOW!!! OK…..,,,,, So you provided a CPU that is hanging on the edge? Why is this an issue in a $10,000 pinball machine? I can have long multiball play sometimes when iam hot, maybe iam hitting to many switches at the same time? Hell Gorgar in 1979 never lost speech or reset during game play, he never let me down !!!!
Is there a fix?
Quoted from MrSmiley:Changed the amp today, sound works fine now and no more distortions.
Where did you get the new amp from?
Quoted from epthegeek:I don't really think the game fits well with co-op, personally. It's not as story-progression-specific as something like exploring the castle in ACNC. It's just play some adventures and have fun.
If you want more people to get to the adventure selector for a full card so they can pick their own - just crank up the number of starting stamps.
Makes sense! Thanks!
Quoted from loneranger:I bet Pinball Life is suddenly selling a lot of Spooky knocker kits, lol
I’ll have to look after work but the knocker wasn’t on the bse? I’ll buy one if that’s the case
Quoted from epthegeek:Not released to the public build yet - soon.
Got it, thanks! I’m excited for it
Quoted from epthegeek:Challenge mode only gives points for megaseeds before the adventure starts. You can flail around for an hour - but if you don’t hit the scoop to start the challenge, no points.
Can’t wait to play it!
Are you also helping on the ultra man/Halloween code?
Quoted from Pinstym:I finished installing the precision flippers and bushings last night.
Only weird thing I ran into was I had previously adjusted the rail that feeds the upper flipper so the ball would roll smoothly from rail to flipper. After installing the the new bushing and flipper, I was getting a hop from rail to flipper (flipper rubber sticking out a bit farther from the rail). Different flipper rubber too, but not sure what that was all about. I moved the rail back pretty much to it's original position and that gave me a smooth transition.
Shoots crazy fast and seems like a new game. Might have to figure out how to lower the flipper power a bit.
Hope these precision flippers hold up, because I can't see going back to stock flippers on this game. Played a ton last night. Turned it off and went to bed. Went back and played some more.
[quoted image]
nice, how much were they?
Quoted from Pinstym:I think I need it. You notice a difference?
How long did it take to install? Is it just like a standard flipper rebuild?
Quoted from epthegeek:Nobody is going to spend more money (licensing/asset creation/etc) on a product that is all done & sold. That’s just silly. These recent changes/updates only happened because I felt like it and had the time.
I definitely appreciate the updates. I just got my knocker too so excited to install that this weekend!
Quoted from MrSmiley:Loving my R&M but recently got Disney+ and enjoying Andor and Mandalorian.
Thinking abour trading my R&M for a Mando LE, what do you think?
Just love the show, huge SW fan.
Would have some space for an additional pin but prices in Europe are crazy, 8k+€ for a Stern Pro.
My other Pin is a SW LE.
That would be really tough for me. Rick and morty is probably my favorite newer pin and mando Le is a close second. My LE plays awesome, I love the code, I love the shots and Integration. The le is very unique compared to the other models so should hold its value. I’d say play the LE. Not a pro or even a prem but the LE if you can and compare. It’s a keeper for us as well as Rick and morty. If you like your Star Wars LE I think mando is a lot better but it’s all opinion
Quoted from orlandu81:Here are the bushings side by side. The original too tall bushing is on the right, you can see the metal bushing is slightly shorter.
[quoted image]
[quoted image]
I didn’t buy the bushings. It does seem tall. Anyone use the original bushings?
07AAA56D-13CA-4247-A377-AB6F55958D17 (resized).jpegQuoted from 1956PINHEAD:Happy81724 How does the balll line up to the flipper rubber with your stock plastic flipper?
Is actually the same. Like the other person said it’s deceiving with the notch out on the metal flipper. Looks like I’m good to do the other flippers!
Me and my family have gone through a lot of different pins in the past 7 years. We are over a 100 pins we have owned in trying to find ones we love. Rick and Morty maybe our favorites ever. Every time I play this pin it makes me smile. I also appreciate Eric to stay dedicated to the code. I just love it all!
Quoted from jk2171:Just got my game last week, and absolutely love it! Shots, theme integration, code…really give props to Spooky and Scott. The shots are so unique and satisfying when you hit them. Modern masterpiece IMO!
Yep, it’s our favorite. Definitely one of the best ever for all the reasons you mention
Quoted from Rarehero:I’m glad AS is going to keep the show going for the sake of the crew. They don’t deserve to be thrown out of work cuz of Justin. As a fan, I dunno if it will work without his voices - but we’ll see.
They signed a contract up to season 10. This might not of been a breach of that contract so Id bet they stick through it until season 10 or have to pay them if they cancel
Quoted from MikeS:I received my Mantis diverter today and installed it in my game. Spinner loops and right orbit shots are super smooth now! Highly recommended. There wasn't enough room or a proper hole when lining up the rail so i used a rubber post to keep tension between the wall and guard rail which works really well. It's a really smooth transition now.
[quoted image][quoted image]
I bought one too. how long did it take to install?
Quoted from gorgar007:Behind the topper spinner is this little black mounting thing. Mine broke - the factory one is pretty weak.
Here's a new one you can 3d print if yours breaks too: https://www.thingiverse.com/thing:6137932
Or if you don't have a printer and need one, pm me I can send one to you.
[quoted image]
Nice! I wish I had a 3d printer. I had to order a new one complete so now I have the broke one and the new one.
Quoted from CLEllison:With the recently released info on Epsteins flight log showing Josh Roiland was on the Lolita Express, is Rick and Morty destined to become a tainted unwanted title like what happened to Ghostbusters? Personally, I've never associated pinball to the evil that men do.
I’ve been looking for an unwanted ghostbusters but every pro and premium is priced crazy. I love that pin
You're currently viewing posts by Pinsider Happy81724.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aw-jeez-official-rick-and-morty-club?tu=Happy81724 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.