Quoted from Whysnow:Maybe toss a spare in the goodie bag for people
There's a goody bag? what was in it? ( mine didn't have one )
Quoted from Whysnow:Maybe toss a spare in the goodie bag for people
There's a goody bag? what was in it? ( mine didn't have one )
Quoted from PinMonk:I'm not sure how a cliffy would help this problem...
While I agree, the guy is pretty darned creative.
That said it was a nod to all the PETG I've replaced/repaired over the years.
Anything hammered with a pinball leaving the PF is gonna suffer.
Having played a R&M I've been amazed at the speed of the ball travel, that more damage is not being seen out there.
Yep this one is a fluke but as far as the ball is concerned that elevated ship is "Target acquired!"
Quoted from Morinack:While I agree, the guy is pretty darned creative.
That said it was a nod to all the PETG I've replaced/repaired over the years.
Anything hammered with a pinball leaving the PF is gonna suffer.
Having played a R&M I've been amazed at the speed of the ball travel, that more damage is not being seen out there.
Yep this one is a fluke but as far as the ball is concerned that elevated ship is "Target acquired!"
Oh, I agree. I'm Cliff's #1 cheerleader. The guy is awesome.
I was just confused about how a cliffy was going to help with this specific area.
Quoted from ziz:This happened a little while ago!
[quoted image]
this happened on mine too. i have an early one #26. spooky, as usual, was super quick to send me a replacement. also added a shorter prop rod (which pushes it up from underneath). i suppose this alleviates the issue. i decided to leave the rod out altogether, as mine's on location (albeit, a shutdown location). but mine broke at the start of the pandemic, so i'd venture to guess they changed the rod to the shorter one in production by the time they started up again.
side note: charlie sent me this himself. gary doesn't send me shit. just kidding, love ya, gary!
Quoted from Kevlar:Strange, I've never had an extra ball shot not award. Are you sure all of the switches in your loop are registering? I don't think the spinner loop is a skill shot? it's a multiplier for the noob noob and garage shots I believe.
Found it. The right orbit triangles were swapped. Makes more sense now!
Son of a bitch! I put up the most amazing ball 1 and started my extra ball. The game got confused getting into a second Meeseeks MB. It spit out a second ball and the Meeseeks MB music was playing but the screen was still the regular screen. Then it reset on me
In Bird Culture, that is considered a dick move.
Thankfully I took the picture before i started playing the extra ball!
20200713_190854 (resized).jpgQuoted from FatPanda:Then it reset on me
In Bird Culture, that is considered a dick move.
Throw in a blank USB, grab the log!
Edit: oh! You already did. Thanks. (Hadn’t checked my mail)
Quoted from epthegeek:The “meaner” dimensions are held back until later in the game, so if you don’t go very deep in numbers of dimensions, you won’t see them.
So that's why I don't know what the heck Mike is talking about. Cause I suck.
Is there a post somewhere about setting up the machine sound? Scott posted a little guide for TNA somewhere that I used before, but I can't find it. For those unfamiliar there's slightly more to it than most machines, there's the volume on the rear of the screen, the amp volume as well as crossover and sub level, as well as the coin door volume level.
Quoted from frankmac:Spooky Combo
[quoted image]
Looking forward to having this exact same combo sometime next summer (#544).
Quoted from frankmac:Spooky Combo
[quoted image]
Spooky trio
Now to find me a nice HUO TNA.
So what is the consensus on going with the Butter Cab? I have no plans to sell it, but does it add value, if I ever did so?
Quoted from LoneStarPinball:So what is the consensus on going with the Butter Cab? I have no plans to sell it, but does it add value, if I ever did so?
Looking at past Spooky games with butter I don't think you'll get a good ROI if you do sell. And it's too risky to ship with the potential for damage. But it looks fantastic and If the game is somewhere where you'll see the art (not stuck between other games) and you have the extra money than I say go for it! you only live once. I kind of regret not going butter just because I plan on keeping the game forever and it does look incredible!
I can confirm butter cab on my recently sold ACNC was a non-factor in the sale and did not result in more money than a similar game without butter. I love the butter cab option and am heavily considering it on my R&M although resale factor is weighing heavily on me especially since I'm already over my space limit.
Quoted from Groo:Spooky solo. It is the center of attention though!
That's a sweet fuckin' Trio you got there.
Let’s see who’s got a spooky Quattro
Quoted from frankmac:Let’s see who’s got a spooky Quattro
R&M build sheet sent soon to be 5, sweet.
AC0C02A0-9DEB-417F-8194-5D0EC0C5D02E (resized).jpegQuoted from Izzy24:Submitted build sheet for 159
Congrats. Its 2 week build time +shipping time correct? Is that what weve seen?
Quoted from Pinball_Freak:R&M build sheet sent soon to be 5, sweet.[quoted image]
Sweet!
Quoted from Pinball_Freak:R&M build sheet sent soon to be 5, sweet.[quoted image]
And what was your number?
Quoted from scruffypinball:Congrats. Its 2 week build time +shipping time correct? Is that what weve seen?
It was 2 weeks from build sheet to invoice and then the next week it shipped for mine, but there was the 4th of July holiday in that time period as well.
Quoted from Pinball_Freak:R&M build sheet sent soon to be 5, sweet.[quoted image]
Well done sir.
Quoted from Vitty:Looks like I’m two build numbers behind zaphx at 164. No build sheet yet.
163 no build sheet yet but excited to be close.
Got my R&M options sheet yesterday, Debated for a while on the Butter cab, but it's unjustifiable as it adds about nothing to the value of the pin. but I've done worse than that in the past. I added Leather as an option on a lease, but then realized it didn't change the residual value. so that was a couple of thousand dollar option, that in the end I just gave to Toyota when the lease ended. The email said that the balance would be invoiced about 30 days prior to shipping But based on the posts I've seen here I might already be within 30 days. I purchased mine through pinballstar, so the times between build sheet and final invoice might be different than one purchased direct. I have #156 for those keeping score.
Quoted from Groo:It was 2 weeks from build sheet to invoice and then the next week it shipped for mine, but there was the 4th of July holiday in that time period as well.
Thanks. So ~3 weeks from buildsheet. I can dig it. Should have 203 by end of September or so.
Nice!
Quoted from zaphX:And what was your number?
If it's the same situation as me, number not known.... whatever is built to go in the Aussie group container I suppose. I have asked a few times, but can't seem to get any info. It's no big deal.
I put my options list in about 3 weeks ago as well, as soon as we recieved it.
Quoted from razorsedge:If it's the same situation as me, number not known.... whatever is built to go in the Aussie group container I suppose. I have asked a few times, but can't seem to get any info. It's no big deal.
I put my options list in about 3 weeks ago as well, as soon as we recieved it.
I'm in Aus and got my invoice this morning. Got my options list on June 19.
Has anyone ever had to dismantle the backbox for transport around the house?
What are your experiences?
Easy Job?
Quoted from waynetrane:Has anyone ever had to dismantle the backbox for transport around the house?
What are your experiences?
Easy Job?
We do have a couple customers who do this! Definitely not recommended but it is very possible.
Quoted from razorsedge:If it's the same situation as me, number not known.... whatever is built to go in the Aussie group container I suppose. I have asked a few times, but can't seem to get any info. It's no big deal.
I put my options list in about 3 weeks ago as well, as soon as we recieved it.
#442 is mine. All Aussie ones go together so our numbers are mixed and not sequential. Still waiting on my invoice build sheet sent back same day we got the group email.
Quoted from Kevlar:Is there a post somewhere about setting up the machine sound? Scott posted a little guide for TNA somewhere that I used before, but I can't find it. For those unfamiliar there's slightly more to it than most machines, there's the volume on the rear of the screen, the amp volume as well as crossover and sub level, as well as the coin door volume level.
Any answer to this? My machine is rattling and the bass is super loud compared to the callouts. Id love to tweak.
Quoted from TigerLaw:Unboxing and setting up No. 115 now with the help of Megatron.
[quoted image]
[quoted image]
That doesn't look like the Megatron I know of...
megatron (resized).jpgQuoted from mbasnight:Any answer to this? My machine is rattling and the bass is super loud compared to the callouts. Id love to tweak.
I just figured this out because it was also driving me nuts.
In the cabinet there is an amplifier with about 5 knobs on it. From furthest away to closest to the coin door they are: Volume, bass, treble, x-over, and something else. It's jammed up against the side of the cabinet so it's hard to read the labels.
Anyway just leave the glass on, adjust volume on the coin door up and down as you play with each of those knobs. You get a good idea what each one does after a while, and eventually you can figure out which is which.
I couldn't even hear the Shwifty song, and then I found a good adjustment for the knobs and now it's crystal clear.
Quoted from ThePinballCo-op:I just figured this out because it was also driving me nuts.
In the cabinet there is an amplifier with about 5 knobs on it. From furthest away to closest to the coin door they are: Volume, bass, treble, x-over, and something else. It's jammed up against the side of the cabinet so it's hard to read the labels.
Anyway just leave the glass on, adjust volume on the coin door up and down as you play with each of those knobs. You get a good idea what each one does after a while, and eventually you can figure out which is which.
I couldn't even hear the Shwifty song, and then I found a good adjustment for the knobs and now it's crystal clear.
Hot damn, the hero we need.
Quoted from fumbleflippers:I’m calling animal welfare
Quoted from Waldo:Why is that dog pink?
Rick keeps bringing me Megatrons from different dimensions. (It’s pet temp hair chalk by the way, for anyone wondering).
11362D3C-812A-467D-A13B-FE7F759855B7 (resized).jpeg2CFC7B87-6C38-4DB9-987C-79FFF939305E (resized).jpeg3AA7E8D7-0FF7-4081-BDF4-C338A270C0EB (resized).jpeg5126E348-D9B7-4023-AC6F-6EC30790E633 (resized).jpeg9B78BFD7-47FD-4F92-A3F8-5AD32A9DE192 (resized).jpegC5F4D67B-13E6-44EB-B421-668B100B621B (resized).jpeg
Quoted from Coindork:Does your dog listen to Punk Rock?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aw-jeez-official-rick-and-morty-club/page/88?hl=easternbloc and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.