(Topic ID: 257850)

Official Rick and Morty Club - Better Than A Vat of Fake Acid...


By TheNoTrashCougar

7 months ago



Topic Stats

  • 4,902 posts
  • 355 Pinsiders participating
  • Latest reply 20 minutes ago by jonesjb
  • Topic is favorited by 236 Pinsiders

You

Linked Games

Topic Gallery

There have been 775 images uploaded to this topic. (View topic image gallery).

600D66AF-3C51-4793-BFCE-BBAC1351D9AB (resized).png
20200804_163316 (resized).jpg
20200805_160910 (resized).jpg
20200805_162528 (resized).jpg
BB2CB666-ECCA-4277-BBC7-E352C86E9F6A (resized).jpeg
F6EA7C60-2923-4504-A0A1-89B329A29B39 (resized).jpeg
IMG_20200803_203301 (resized).jpg
A8656863-5BC5-4E1E-BF9D-C6044DDFEA53 (resized).png
R-m (resized).png
DSCN7114 (resized).JPG
DSCN7113 (resized).JPG
91F0A298-8CF6-4FD1-AE50-2A5D5E89A61F.gif
31256410-5448-4345-A6E5-26D73E0ECB3E (resized).jpeg
20200729_214422 (resized).jpg
c54 (resized).JPG
A19DC112-E711-47FF-B0A3-91B8BC81DED5 (resized).jpeg

Topic index (key posts)

40 key posts have been marked in this topic, showing the first 10 items. (Show topic index)

There are 4902 posts in this topic. You are on page 71 of 99.
#3501 55 days ago
Quoted from jhoward1082:

I was wondering the same thing. These definitely seem to just be like paper stickers. Almost all of mine are worn thru in the center now. There is definitely a market for someone to make higher quality ones.

Dang, I might pass on those then...or request them separately so I can mylar them. Even aftermarket mod decals I've seen have mylar/lamination on them.

12
#3502 55 days ago

Chris from Kingpin is the best, he helped me figure it out. There were 2 cables unplugged from the mainboard in the head. But I didn't see them at first as they had retracted down into the plastic shielding that protects the cables, so I didn't even know they were there! Thanks Chris and also epthegeek for helping too.

Now for the eye candy. That butter cabinet is SO MUCH EYE CANDY.

IMG-5188 (resized).jpgIMG-5189 (resized).jpgIMG-5190 (resized).jpgIMG-5191 (resized).jpgIMG-5192 (resized).jpgIMG-5193 (resized).jpgIMG-5194 (resized).jpgIMG-5195 (resized).jpg
#3503 55 days ago
Quoted from Rarehero:

Dang, I might pass on those then...or request them separately so I can mylar them. Even aftermarket mod decals I've seen have mylar/lamination on them.

This game also seems to obliterate the post rubbers. It doesn’t help that they use clear “slimmer” style rubbers but mine were not just noticeably dirty after even maybe 50 games but also chewed up to hell. It’s strange because ACNC uses the same post rubbers and I do not have that issue. I’m not sure if the game may be really roughing the balls up because of all the exposed ball guides that the ball constantly whacks.

#3504 55 days ago
Quoted from f3honda4me:

Chris from Kingpin is the best, he helped me figure it out. There were 2 cables unplugged from the mainboard in the head. But I didn't see them at first as they had retracted down into the plastic shielding that protects the cables, so I didn't even know they were there! Thanks Chris and also epthegeek for helping too.
Now for the eye candy. That butter cabinet is SO MUCH EYE CANDY.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Thanks for posting. I'm still deciding black or purple door. Leaning towards black. Same question on the speaker lights. They look great but I hate the reflection

#3505 55 days ago
Quoted from delt31:

Thanks for posting. I'm still deciding black or purple door. Leaning towards black. Same question on the speaker lights. They look great but I hate the reflection

Purple. Trust me (I can run through the reasons why, if really necessary, but it is the right decision visually). And get the lights. You can unplug if necessary.

#3506 55 days ago

Could spooky Mylar in the factory for a charge ?

#3507 55 days ago
Quoted from jbigdoggf:

Could spooky Mylar in the factory for a charge ?

Same argument for protectors.

#3508 55 days ago
Quoted from delt31:

Thanks for posting. I'm still deciding black or purple door. Leaning towards black. Same question on the speaker lights. They look great but I hate the reflection

I have the speaker lights and don’t notice a glare.

#3509 54 days ago

I haven’t really heard this discussed yet.

Has anyone else changed their attract mode for Interdimensional cable?

I was going through my settings and turned mine on. So far I’ve seen the episode of how a plumbus is made.
Not sure how many different there are yet.

Friggin cool ass feature.

#3510 54 days ago
Quoted from Coindork:

I haven’t really heard this discussed yet.
Has anyone else changed their attract mode for Interdimensional cable?
I was going through my settings and turned mine on. So far I’ve seen the episode of how a plumbus is made.
Not sure how many different there are yet.
Friggin cool ass feature.

Also just saw the one for Two Brothers.

#3511 54 days ago

Looks like there are five things from Interdimensional cable in the attract mode:

Blips and Chits - commercial
Two Brothers - trailer
How they do it - Plumbus
Ants in my eyes Johnson - commercial
Turbulent Juice - commercial

Hoping they ad How Did I Get Here and the Eyehole Man

#3512 54 days ago
Quoted from razorsedge:

That's a good thing!... not many things in pinball more irritating than that horrible fake screeching noise that some mobs substitute for reality. Better off with nothing at all if one doesn't want a physical knocker, than some god awful sfx.

What’s not to like about a loud screeching noise announcing a replay?!

#3513 54 days ago
Quoted from Coindork:

Looks like there are five things from Interdimensional cable in the attract mode:
Blips and Chits - commercial
Two Brothers - trailer
How they do it - Plumbus
Ants in my eyes Johnson - commercial
Turbulent Juice - commercial
Hoping they ad How Did I Get Here and the Eyehole Man

What’s about the fake doors ??

#3514 54 days ago
Quoted from northerndude:

What’s about the fake doors ??

"Let's see where this goes..." The Real Fake Doors one is probably my favorite. This is an awesome feature! I hope it expands over time. I'm sure we're going to see another Interdimensional Cable in Season 5.

#3515 54 days ago
Quoted from Coindork:

Looks like there are five things from Interdimensional cable in the attract mode:
Blips and Chits - commercial
Two Brothers - trailer
How they do it - Plumbus
Ants in my eyes Johnson - commercial
Turbulent Juice - commercial
Hoping they ad How Did I Get Here and the Eyehole Man

If I’m not mistaken I sworn I seen stealy character stealing office items on jack dangers stream, but i haven’t seen it on my Rick in morty pin. I agree with the list you posted was hoping to see the stealy trailer......
I found it at Time 3.30.40

10
#3516 54 days ago

I havent gotten to play nearly as much as I'd hope. Less than 50 games total I'd say however I had sometime to bring over a friend and show him the machine today and ended up finishing our session with a PB.

Highlight of the game was ripping the spinner shot three times in a row and then straight to garage portal for a 4X super skill shot bonus of 1.4 million.

This is such a great game. Thank you again Spooky

20200613_163940 (resized).jpg
#3517 54 days ago

Strange but this is the first game I don't feel compelled to add any mods to. Maybe that will change with time...

#3518 54 days ago
Quoted from adamross:

Strange but this is the first game I don't feel compelled to add any mods to. Maybe that will change with time...

I've the same thoughts.
Don't know why.
Maybe i wanna keep the lightshow intact without disturbing elements.
But i'm definitive in with some Meeseeks, and a nice portal on the 'portal-plastic'.
Lot of space there too. - Thinking of a tiny net for the basket at the garage
Like to complete the megaseed tree too.

#3519 54 days ago

All I added was a pickle rick. I also have the squanch ball cutout and the coin cutouts but not installed yet.

#3520 53 days ago

I agree on scoop add a washer to the bottom of the 3 screws and lower scoop . helps alot !
Also change posts cause the originals wear out and remove screws from loop and garage shot . Still clunky but better and all in all fun .
I used scotch tape to hold washers in place until I could screw in .

2E645EA7-BAB8-4775-81C0-11C7A4A68047 (resized).jpeg
#3521 53 days ago

Hey everyone. #533 checking in. Can someone post the dimensions in-box and out? I wanna know how much of my apartment needs to be dynamited to get this thing in the house next summer.....

#3522 53 days ago
Quoted from sthippie:

Hey everyone. #533 checking in. Can someone post the dimensions in-box and out? I wanna know how much of my apartment needs to be dynamited to get this thing in the house next summer.....

Out of box:
52”L X 29”W X 76”H (without topper), 88.5”H (with topper)

I have a power sander on order to shave an inch or so off my door frame to get that sucker in () and am waiting to hear if the topper can be modified to sit a bit lower. Dynamite is plan B. Let me know if you have an extra stick.

#3523 53 days ago
Quoted from Spelunk71:

Out of box:
52”L X 29”W X 76”H (without topper), 88.5”H (with topper)
I have a power sander on order to shave an inch or so off my door frame to get that sucker in () and am waiting to hear if the topper can be modified to sit a bit lower. Dynamite is plan B. Let me know if you have an extra stick.

Wouldn’t you take it in folded up on a trolley?

As it comes in the box?

Then it’ll be under 5’ high ...

rd

#3524 53 days ago
Quoted from Rarehero:

Family Guy. Seth MacFarlane did tons of custom callouts for 5 different characters, plus Stern was able to use all voices clips for almost all characters from the show. They even used Norm MacDonald's Death voice even though they weren't supposed to lol

Good point, FGY had pretty incredible assets as well. Tron did as well come to think of it.

Has anyone here watched Solar Opposites? I see its on Hulu, which my family does not have. Is it in the same universe as R&M?

My R&M pingulp arrived from trilogybeer last week. Getting close to getting the game.

#3525 53 days ago
Quoted from rotordave:

Wouldn’t you take it in folded up on a trolley?
As it comes in the box?
Then it’ll be under 5’ high ...
rd

True, but I’ve got a height and a width issue. My ceiling is an inch too low to accommodate the raised topper and the doorway is exactly 29”’ wide. I think if I can sand to get another inch or so of width clearance it should go in just fine.

#3526 53 days ago
Quoted from Spelunk71:

True, but I’ve got a height and a width issue. My ceiling is an inch too low to accommodate the raised topper and the doorway is exactly 29”’ wide. I think if I can sand to get another inch or so of width clearance it should go in just fine.

I have a 30” door (29” open) in my game room and simply removing the door and popping off the perimeter door stops (the trim pieces the door closes against) can fit most any new game through. Door stops can be removed with a small pry bar or chisel normally held in place with small staples or Brad nails. Simple to put back on and no permanent sanding.

#3527 53 days ago
Quoted from Yelobird:

I have a 30” door (29” open) in my game room and simply removing the door and popping off the perimeter door stops (the trim pieces the door closes against) can fit most any new game through. Door stops can be removed with a small pry bar or chisel normally held in place with small staples or Brad nails. Simple to put back on and no permanent sanding.

Thanks for the tip. The house was built in the 1930s and has some quirky construction, but definitely worth a shot.

#3528 52 days ago
Quoted from TigerLaw:Good point, FGY had pretty incredible assets as well. Tron did as well come to think of it.
Has anyone here watched Solar Opposites? I see its on Hulu, which my family does not have. Is it in the same universe as R&M?
My R&M pingulp arrived from trilogybeer last week. Getting close to getting the game.

Ive watched the first few episodes, it wasnt to bad, not as easy to watch as Rick and Morty for me. I'm not sure if they are in the same universe, i mean they could be, but they never cross or bring it up that ive seen yet!

#3529 52 days ago
Quoted from Spelunk71:

I think if I can sand to get another inch or so of width clearance it should go in just fine.

Sand an INCH off the door frame?

You know that you could take out 4 bolts from the head and rotate it slightly to get the game through the door, right? No sanding required.

#3530 52 days ago

Saw your game in half to easily bring it inside.

#3531 52 days ago
Quoted from Cheeks:

Sand an INCH off the door frame?
You know that you could take out 4 bolts from the head and rotate it slightly to get the game through the door, right? No sanding required.

Nah...only a half inch on each side. Thanks for that info, though I was kinda looking forward to breaking out the power tools (not).

I suppose I could just remove the head. I’ve done that on a Stern Spike, which is pretty easy. Anyone know how gnarly those connections are on Rick and Morty? The doorway is at the top of my basement stairwell so would be good to avoid extra maneuvering on the way down.

#3532 52 days ago

Still hoping Spooky will fix all this weird stuff that is still popping up!!So,the rubber that is in use goes by-by in as few plays as 50???Spooky,use better rubber,PLEASE!!!

#3533 52 days ago
Quoted from Cheeks:

Sand an INCH off the door frame?

That was my thought also, sanding an inch off a door frame would be like a person in prison using a file to cut the bars lol! I'd recommend using a hand-held power planer (although they can mess up wood easily). Better solution would be to remove the head of the pin I'm thinking.

#3534 52 days ago
Quoted from Spelunk71:

Out of box:
52”L X 29”W X 76”H (without topper), 88.5”H (with topper)
I have a power sander on order to shave an inch or so off my door frame to get that sucker in

Why not just take the head off?

Quoted from TigerLaw:

Has anyone here watched Solar Opposites? I see its on Hulu, which my family does not have. Is it in the same universe as R&M?

Funny show. Similar to R&M in both humor an animation style. I could see a crossover in the future.

#3535 52 days ago
Quoted from hawkmoon:

Still hoping Spooky will fix all this weird stuff that is still popping up!!So,the rubber that is in use goes by-by in as few plays as 50???Spooky,use better rubber,PLEASE!!!

I agree here. They look like the Pinball Life "perfect play" post sleeves. Regardless the brand, time to change to another brand for the factory post rubbers.

#3536 52 days ago

What's the recommended way to hook up an external sub (Polk PSW10) to this game? Y-Splitter off the aux input? Direct off the cab speaker terminals? Pinnovators? thanks!

#3537 52 days ago
Quoted from MikeS:

What's the recommended way to hook up an external sub (Polk PSW10) to this game? Y-Splitter off the aux input? Direct off the cab speaker terminals? Pinnovators? thanks!

Curious, Why? This has to be the loudest and deepest base game in my collection. Turned up it will move other games out of the lineup.

#3538 52 days ago
Quoted from Yelobird:

Curious, Why? This has to be the loudest and deepest base game in my collection. Turned up it will move other games out of the lineup.

I agree that it doesn't really need it but my preference would be to have less bass in the cabinet speaker and more in the external sub because of how much the cab speaker rattles the cabinet and glass. It feels like a shaker when it's turned up.

#3539 52 days ago
Quoted from MikeS:

I agree that it doesn't really need it but my preference would be to have less bass in the cabinet speaker and more in the external sub because of how much the cab speaker rattles the cabinet and glass. It feels like a shaker when it's turned up.

If that's your goal, just swap out the wiring on the amp and don't use the cabinet sub?

#3540 52 days ago
Quoted from MikeS:

I agree that it doesn't really need it but my preference would be to have less bass in the cabinet speaker and more in the external sub because of how much the cab speaker rattles the cabinet and glass. It feels like a shaker when it's turned up.

The sub does rattle everything quite a bit. I've tuned it so that on Volume 3, it only rattles a little. Any louder than that and it rattles the whole game.

I've thought about building a simple drop-in box for the sub to contain all of that rattle. 1/2" MDF would do the trick.

#3541 52 days ago
Quoted from epthegeek:

If that's your goal, just swap out the wiring on the amp and don't use the cabinet sub?

I did think about doing this but I do like some of the force feedback that it gives you.

Quoted from FatPanda:

The sub does rattle everything quite a bit. I've tuned it so that on Volume 3, it only rattles a little. Any louder than that and it rattles the whole game.
I've thought about building a simple drop-in box for the sub to contain all of that rattle. 1/2" MDF would do the trick.

I played around with the amp dials and have it adjusted about the same. Up to volume 3 it sounds really good with minimal rattle and fairly punchy bass. I was more thinking of using the external sub since I have one that's not being utilized, just to to be able to push the volume a bit higher while turning down the bass (on the amp) a tad more and supplementing that bass with the external sub. It does sound awesome as is though! A drop in box would likely solve this as well.

#3542 52 days ago

Trick for pf glass rattling.

take a small ziptie, cut off and just use the zip part. Push that thin plastic piece between the plastic glass guide and the cab wood along the side of the cab in a few spots. it will hold tight with friction and give that plastic just a few bumps of snugness to hold the glass. Pretty much eliminates any glass rattle from bass.

#3543 52 days ago
Quoted from Whysnow:

Trick for pf glass rattling.
take a small ziptie, cut off and just use the zip part. Push that thin plastic piece between the plastic glass guide and the cab wood along the side of the cab in a few spots. it will hold tight with friction and give that plastic just a few bumps of snugness to hold the glass. Pretty much eliminates any glass rattle from bass.

Nice trick! I'll have to try this.

#3544 52 days ago
Quoted from FatPanda:

Nice trick! I'll have to try this.

use the tinyest of zip ties.

Really just need the smallest bit. Do it in like 5 spots along each side.

Goo trick for any game.

#3545 52 days ago
Quoted from TigerLaw:

Has anyone here watched Solar Opposites? I see its on Hulu, which my family does not have. Is it in the same universe as R&M?

Not the same universe. Similar adult humor, but it’s more of a traditional sitcom than R&M...yes there are aliens and robots and chaos, but it’s more about the burbs & school & goofing on modern sitcom/cultural tropes.

Wouldn’t shock me if Stern or someone has already scooped up the rights to Solar Opposites in the wake of dropping the ball on R&M.

#3546 52 days ago
Quoted from TigerLaw:

Good point, FGY had pretty incredible assets as well. Tron did as well come to think of it.

Most Sterns of the SAM era had great assets. Spidey has everything from the 3 movies + JK Simmons doing custom. Avatar had everything from the movie + Stephen Lang doing custom. Tron had movie assets + Daft Punk...no actors for custom but David Theil & his wife did a great job. Iron Man almost blew it with the generic military guy voice - but saves the day with first 2 movie assets/voices and a fantastic JARVIS soundalike....plus some incredible score from the movie.

#3547 52 days ago
Quoted from Rarehero:

Wouldn’t shock me if Stern or someone has already scooped up the rights to Solar Opposites in the wake of dropping the ball on R&M.

I would be a little shocked if any pinball company has any interest in it, much less paid for rights already, since it has not proved to be a cultural phenom like R&M by any stretch. I liked it, but I can think of many other shows that would make better pin themes. People don't identify with space aliens.

11
#3548 52 days ago

I'm no Karl D'Angelo, but after a few days I'm starting to get the hang of this. What a rush when you get this game going!

20200615_130548 (resized).jpg
#3549 52 days ago
Quoted from MikeS:

I'm no Karl D'Angelo, but after a few days I'm starting to get the hang of this. What a rush when you get this game going!
[quoted image]

I told ya we were shipping some really nice playing games

#3550 52 days ago
Quoted from SpookyLuke:

I told ya we were shipping some really nice playing games

You weren't kidding.. It plays fantastic! I haven't had to tweak anything. Thanks again for everything Luke!

Promoted items from the Pinside Marketplace
$ 279.95
Lighting - Led
Pin Stadium Pinball LEDs
$ 48.00
Cabinet - Other
ModFather Pinball Mods
$ 499.95
Lighting - Led
Pin Stadium Pinball LEDs
From: $ 25.00
Cabinet - Other
Filament Printing
$ 34.00
Playfield - Toys/Add-ons
The MOD Couple
$ 24.00
Playfield - Other
Pinball Mod Co.
$ 42.00
Playfield - Toys/Add-ons
ModFather Pinball Mods
There are 4902 posts in this topic. You are on page 71 of 99.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside