Rick and Morty (Blood Sucker Edition)
Spooky Pinball, 2020
Rick and Morty (Standard)
Spooky Pinball, 2020"wubba lubba dub dub"
If you find yourself in Fargo, Rick & Morty is on location at Drekker Brewing.
Bill
Fargo Pinball
http://www.fargopinball.com/
Like Us On Facebook
www.facebook.com/fargopinball
2020-10-26 18.42.19 (resized).jpgI couldn't get the right one on the main platforms, was able to make my rug on aliexpress. I had to search it as space themed doormat or something like that.
This will go in front of R&M FO SHO!
Quoted from kidchrisso:spookyluke can you give us the latest number that has shipped?
Not sure exactly what as all shipped as they are all stacked in deep lines but I can say we are putting games on the line in the 320s tomorrow
Quoted from SpookyLuke:Not sure exactly what as all shipped as they are all stacked in deep lines but I can say we are putting games on the line in the 320s tomorrow
Awesome.
Now. Stop playing around on the internet and get back to work!
(Anxiously awaiting the 450s)
Quoted from Kevlar:That seems impossible, how long have you had your machine? maybe your meeseek target isn't registering very well?
Only a few days. LoL. I’m not great player but haven’t been trying for it yet.
I’ve had a good number of Glom MB tho.
Quoted from SpookyLuke:Not sure exactly what as all shipped as they are all stacked in deep lines but I can say we are putting games on the line in the 320s tomorrow
Well then your half way there for me...#635
Thanks,
Kidchrisso
Quoted from wcbrandes:Mike what does the one white light on your adventure card mean? yellow Im guessing is still an adventure spotted by mystery reward?
It means I didn't complete that adventure. Green=complete. Sad part is I was just one shot away (scoop) and I drained. It was nearly the perfect game.
Quoted from blimpey:For traveling between R&M and Avengers dimensions.
From eBay for around $40. Only one is for me.
[quoted image]
I decided to put this mat in front of my R&M to challenge the player.
20201029_004756 (resized).jpg
Added also a monster to the free area around the portal plastic.
Want to put a led bumper ring behind the half transparent monster bg.
20201028_141421 (resized).jpg20201028_141431 (resized).jpg
Quoted from PinBalt:I thought i saw someone say that in newer code that there are some callouts with the voice from Scary Terry. Can anyone confirm that?
Not in the game, but in attract mode if you touch the buttons
"Hands off my buttons bitch!" Or something similar
I'll just note that I can pretty easily hit the Jerry shot consistently on my machine. I can actually hit that more consistently than my left ramp, haha.
Been dealing with a surge of covid, working a long stretch of days with nights on call... it was nice to come.home to Rick and Morty #258.
My wife LOVES this game, especially when it makes fun of you. This is a keeper.
(I'll post later when I get more time to go over some of the issues uncovered, I too have trouble with the legs).
IMG_20201028_154624__01 (resized).jpgIMG_20201028_195320__01 (resized).jpgIMG_20201028_201207__01 (resized).jpgIMG_20201028_164844 (resized).jpgIMG_20201028_164851 (resized).jpgIMG_20201028_175112__01 (resized).jpgIMG_20201028_165133__01 (resized).jpgIMG_20201028_165043__01 (resized).jpgIMG_20201028_165248__01 (resized).jpgIMG_20201028_165408 (resized).jpgIMG_20201028_201240__01 (resized).jpgIMG_20201028_213731__01 (resized).jpgQuoted from MikeS:Finally broke the 100 million barrier! My previous high was 99m. I was only one stamp away from a perfect green card too.
[quoted image][quoted image]
That’s awesome! So, difficult!! Do you have your card set to 2 stamps to start instead of 4?
Quoted from Izzy24:That’s awesome! So, difficult!! Do you have your card set to 2 stamps to start instead of 4?
Yep. I have it set to 2 now but will likely reduce it to 0 once more Adventures are released.
Thanks to those that shared about the legs pushing into the decal. I checked mine out (#238) and found the start of small wrinkles on the decal behind the front legs.
I added additional metal cabinet protectors (https://www.pinballlife.com/metal-cabinet-protectors-set-of-4.html) on top of the existing ones and that moved the legs far enough away that there's no chance of the leg touching the decals now. The screws for the existing protectors were long enough to hold both sets.
While I was at it, I added some purple nylon washers (https://www.pinballlife.com/pinguard-nylon-leg-and-bolt-protectors.html) to protect the legs finish.
IMG_2379 (resized).jpgQuoted from lookyloo:Thanks to those that shared about the legs pushing into the decal. I checked mine out (#238) and found the start of small wrinkles on the decal behind the front legs.
I added additional metal cabinet protectors (https://www.pinballlife.com/metal-cabinet-protectors-set-of-4.html) on top of the existing ones and that moved the legs far enough away that there's no chance of the leg touching the decals now. The screws for the existing protectors were long enough to hold both sets.
While I was at it, I added some purple nylon washers (https://www.pinballlife.com/pinguard-nylon-leg-and-bolt-protectors.html) to protect the legs finish.
[quoted image]
Thanks for posting this. I put some nylon washers to create a gap until I got my order of metal leg protectors in. I am in the same boat. Have a small wrinkle but nothing major yet. Want to make sure it's fixed soon because I nudge the shit out of this game!
Quoted from Gasoline:Spooky: any possible updates to root cause to the issue? bad production leg batch?
It would seem so. Should be sorted now. There will obviously be some lag with games being in boxes or shipped. Leg manufacturer is aware and we will be increasing the protector thickness regardless. Most people are just throwing an extra set of metal protectors over the top!
Quoted from SpookyLuke:It would seem so. Should be sorted now. There will obviously be some lag with games being in boxes or shipped. Leg manufacturer is aware and we will be increasing the protector thickness regardless. Most people are just throwing an extra set of metal protectors over the top!
Is there a recommended protector that I should get to prevent further damage?
Is there anything I can do to the existing cut in the material to prevent further damage?
Quoted from mbasnight:Is there a recommended protector that I should get to prevent further damage?
Is there anything I can do to the existing cut in the material to prevent further damage?
Hit me with an email and some photos and I will see how I can help!
Quoted from SpookyLuke:Hit me with an email and some photos and I will see how I can help!
probably a silly Q but what is your email? I only know squirrel's email 
Quoted from Palmer:Have a small wrinkle but nothing major yet. Want to make sure it's fixed soon because I nudge the shit out of this game!
Agreed on the nudging.. it's a necessity with this one. I stopped playing until I got those protectors to avoid any further damage for that reason.
Quoted from lookyloo:Thanks to those that shared about the legs pushing into the decal. I checked mine out (#238) and found the start of small wrinkles on the decal behind the front legs.
I added additional metal cabinet protectors (https://www.pinballlife.com/metal-cabinet-protectors-set-of-4.html) on top of the existing ones and that moved the legs far enough away that there's no chance of the leg touching the decals now. The screws for the existing protectors were long enough to hold both sets.
While I was at it, I added some purple nylon washers (https://www.pinballlife.com/pinguard-nylon-leg-and-bolt-protectors.html) to protect the legs finish.
[quoted image]
Over time it looks like leg protectors will create a ripple in the decals as in picture?
Often wondered if running an exacto knife around leg protector would stop this?
MB was one of the first games that had these issues big time, and then it was Transformers.
Quoted from SpookyLuke:Not sure exactly what as all shipped as they are all stacked in deep lines but I can say we are putting games on the line in the 320s tomorrow
Hope I get my invoice soon then (294)!
Or is there a hold up with Butter again?
Quoted from Shapeshifter:Often wondered if running an exacto knife around leg protector would stop this?
yes
Quoted from Shapeshifter:Often wondered if running an exacto knife around leg protector would stop this?
That's my plan when my game arrives. My TNA front cab decal bubbled a bit around the shooter plate too because the decal wasn't cut around it. Seems like an area of easy improvement for Spooky to cut the decals around areas that would otherwise make contact with them.
This is a great episode with Charlie Emery on the show and Jack danger. Charlie talks about how they’re going to hopefully be able to get all the Rick and Morty’s done earlier than they had planned… I think he said they may be done as early as April, May or June.
Also he mentioned they will probably be doing a TNA 2.0!!! Basically TNA on the line again with maybe some new features but same gameplay. Sweet!!!!
If you haven’t listened to this episode of super awesome pinball show check it out… It’s super awesome 
https://podcast.app/the-super-awesome-pinball-show-e120399914/?utm_source=ios&utm_medium=share
here is the correct link to the podcast mentioned above (the one above is actually for JJP/GnR)
https://podcast.app/the-super-awesome-pinball-show-e120399914/
Quoted from pinball_ric:here is the correct link to the podcast mentioned above (the one above is actually for JJP/GnR)
https://podcast.app/the-super-awesome-pinball-show-e120399914/
Oops 
Thanks for posting that correction!
Quoted from Pinball-Obsessed:Oops
Thanks for posting that correction!
Total Jerry move! just kidding my friend. At least it wasn’t a porn hub link.
Quoted from wcbrandes:Does anyone have buyers remorse? especially at the premium prices.....Im on the fence.
I do yes. Selling after a week or so.
I've got a back of mind fear about that given mine's getting very close to arriving, but trying to tell myself there's no way it will happen given outside of your post I can't recall anyone else having this happen.
Quoted from Our_Man_in_Oz:I've got a back of mind fear about that given mine's getting very close to arriving, but trying to tell myself there's no way it will happen given outside of your post I can't recall anyone else having this happen.
Then you need to read my PM 
Quoted from wcbrandes:Then you need to read my PM
Not sure what your endgame is here.
Quoted from wcbrandes:Then you need to read my PM
Ok I await your PM. If somehow all goes how south, it's not like I'd do badly if I had to offload it, there's enough local covid over-hyped types here at the moment who are soliciting to want to buy them (for well over the odds) before anyone's even received one locally yet.
Quoted from Our_Man_in_Oz:I've got a back of mind fear about that given mine's getting very close to arriving, but trying to tell myself there's no way it will happen given outside of your post I can't recall anyone else having this happen.
Look I really like Spooky and the people that work there, and pinball is a finicky hobby especially when multiples that are not easy to trace start to go on day 1. I have replaced three boards and now replacing ribbon chord and I still have a ton of issues that I am trying to tackle one by one. I have not even begun to do all the things you have to do to dial the game in because I need to work on getting bugs out first. I will say this, please consider and choose your distributor carefully because without Rob Anthony, who is one of the best techs out there, I would have a 250 lb paper weight. I now have a sticking left lower flipper, the upper decides not to work until you reset the gam occasionally and it now locks up about 10% of the time and needs a reboot. It is a work in progress and when I have more time....Rob, if your reading I will be asking and needing some more help! All companies have issues it's friggin Pinball. This is why I think it is so stupid when certain fanboys start pissing over one company or the other, let it go, you will eventually get it all working 100%
Quoted from wcbrandes:Look I really like Spooky and the people that work there, and pinball is a finicky hobby especially when multiples that are not easy to trace start to go on day 1. I have replaced three boards and now replacing ribbon chord and I still have a ton of issues that I am trying to tackle one by one. I have not even begun to do all the things you have to do to dial the game in because I need to work on getting bugs out first. I will say this, please consider and choose your distributor carefully because without Rob Anthony, who is one of the best techs out there, I would have a 250 lb paper weight. I now have a sticking left lower flipper, the upper decides not to work until you reset the gam occasionally and it now locks up about 10% of the time and needs a reboot. It is a work in progress and when I have more time....Rob, if your reading I will be asking and needing some more help! All companies have issues it's friggin Pinball. This is why I think it is so stupid when certain fanboys start pissing over one company or the other, let it go, you will eventually get it all working 100%
So you've had a bunch of unfortunate technical and q.c. issues then. It's not a 'I don't like it as game' type scenario by all accounts. Sorry to hear it's gone so badly. Can't say we have any choice whatsoever in 'choosing our distributor' since there isn't one here, we are at the mercy of what Spooky sent us in the container. We can only hope they took a little extra time to go over them knowing they were going this far without any local support mechanism...
Quoted from Our_Man_in_Oz:So you've had a bunch of unfortunate technical and q.c. issues then. It's not a 'I don't like it as game' type scenario by all accounts. Sorry to hear it's gone so badly. Can't say we have any choice whatsoever in 'choosing our distributor' since there isn't one here, we are at the mercy of what Spooky sent us in the container. We can only hope they took a little extra time to go over them knowing they were going this far without any local support mechanism...
No not at all! I bought the game with everything on it including butter! I will let you know how the game play is when I get it all dialed in and running properly!
I'm sure this game will rock, however you can't blame someone for having a bad taste after days of repair on a new out of box 9500 game and still has many many issues to go!
a
Quoted from wcbrandes:No not at all! I bought the game with everything on it including butter! I will let you know how the game play is when I get it all dialed in and running properly!
I'm sure this game will rock, however you can't blame someone for having a bad taste after days of repair on a new out of box 9500 game and still has many many issues to go!
That's in a way good to hear/know. Fingers crossed for you man and hope it all gets sorted soon. Also, touch wood for the container of ours coming to Oz that Spooky paid a little extra care to ensure they were in good shape off the line, I'd hate for any of us, pretty well skilled in pinball tech (such as myself) or not to have to start dealing with qc issues out of the box..
Quoted from Pinball-Obsessed:This is a great episode with Charlie Emery on the show and Jack danger. Charlie talks about how they’re going to hopefully be able to get all the Rick and Morty’s done earlier than they had planned… I think he said they may be done as early as April, May or June.
Also he mentioned they will probably be doing a TNA 2.0!!! Basically TNA on the line again with maybe some new features but same gameplay. Sweet!!!!
If you haven’t listened to this episode of super awesome pinball show check it out… It’s super awesome
https://podcast.app/the-super-awesome-pinball-show-e120399914/?utm_source=ios&utm_medium=share
TNA 2.0!?! Oh man scott I'm so in. Do previous spooky buyers get any kind of priority for pre orders on the next game?
Quoted from JohnDeere:TNA 2.0!?! Oh man scott I'm so in. Do previous spooky buyers get any kind of priority for pre orders on the next game?
Well...I may have to order my second NIB game then...
We better move sooner so I don't have to move RM after we get it, was thinking it'd be October before #745 arrived!
Guess there are worse problem to have in life?
I must be a horrible player because my average ball time is like 20 seconds. Please tell me it’ll get easier. I already have the training wheels on with ball save from the portal and horseshoe.
Quoted from rai:I must be a horrible player because my average ball time is like 20 seconds. Please tell me it’ll get easier. I already have the training wheels on with ball save from the portal and horseshoe.
My average was 13 seconds.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aw-jeez-official-rick-and-morty-club/page/142 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Granite Bay, CA
Newport
Vancouver, BC
Recklinghausen
Sydney
