Quoted from NeilMcRae:my game
Nr.?
Quoted from BillyPilgrim:#151 arriving!
[quoted image]
Quoted from zaphX:Correct. $9154 fully loaded with everything but the bill acceptor, plus shipping.
I opted for the bill acceptor. I may use it for the headphone jack or harryhoudini microverse battery.
If you haven’t tried it you can hear more detail on the high end sounds by turning down the subwoofer. Also the glass doesn’t rattle. You can find the manual for the Lepai LP-168HA amp online. I adjusted the Sub Volume knob. There is a sound test in the settings that will play different back ground songs and you can reach the knob from the coin door.
Quoted from ripple:If you haven’t tried it you can hear more detail on the high end sounds by turning down the subwoofer. Also the glass doesn’t rattle. You can find the manual for the Lepai LP-168HA amp online. I adjusted the Sub Volume knob. There is a sound test in the settings that will play different back ground songs and you can reach the knob from the coin door.
Somebody turns subs down?
Nahh I get it
.
Quoted from Coindork:How old are your boys? And do they watch the show?
They’re 11 n 12 .Yeah I know ,but they are both honor roll students n never in trouble .I watched Ted with them the other night I’m not a fan of hiding stuff I’d rather have them ask me than find out the facts of life from a group of kids Lmao
Quoted from Kkoss24:They’re 11 n 12 .Yeah I know ,but they are both honor roll students n never in trouble .I watched Ted with them the other night I’m not a fan of hiding stuff I’d rather have them ask me than find out the facts of life from a group of kids Lmao
Gotcha.
So they watch the show then?
If so and they are into the show and into pinball there is no way they would not be into it. Them integration is incredibly well done.
A lot a cursing in the game but that can be adjusted in the setting to however you feel comfortable with it.
Quoted from Kkoss24:they are both honor roll students
Makes sense they would enjoy Rick and Morty then - it's an intelligently written show with some deep concepts.
Quoted from BillyPilgrim:#151 arriving!
my god, I hope you've got a safety net set up. that machine is going to fall out of the back of the fedex truck as soon as the driver opens the doors!!
Quoted from Makakka:You ordered the bill acceptor add-on?
I ordered the coin door with the dollar bill acceptor plate, yes.
this way I can either add a headphone jack, pre-designed mod or make my own mini / micro universe mod to put there
Quoted from j_m_:my god, I hope you've got a safety net set up. that machine is going to fall out of the back of the fedex truck as soon as the driver opens the doors!!
Agreed, that's one heck of a grade to your road!
I just found out that no. 158 has been held up by my own stupid special request
note to self: do not, I repeat, do not ask scott to sign any more games. I meant to sign it with a marker!!!
and I won't even go into what eric did
Quoted from j_m_:I just found out that no. 158 has been held up by my own stupid special request
note to self: do not, I repeat, do not ask scott to sign any more games. I meant to sign it with a marker!!!
and I won't even go into what eric did
Well, clearly you want to tell us, you brought it up and you can't do a built up and, you know......not deliver :0
Quoted from northerndude:Well, clearly you want to tell us, you brought it up and you can't do a built up and, you know......not deliver :0
clearly I already explained that I was having it signed by the team (this covid thing has just made a simple request a bit more difficult, that's all
is this a us to western canada translation issue? I have no probably chatting with canadians that reside in ontario and nova scotia. are you telling me that the the people in saskatchewan as bad as those that reside in montreal?
Quoted from j_m_:and I won't even go into what eric did
Oh, I figured you had something more in depth there.
So you asked them to sign it and they signed it, ok.
Quoted from northerndude:Oh, I figured you had something more in depth there.
So you asked them to sign it and they signed it, ok.
Yes, he made it sound more intriguing/out there.
Quoted from Calfdemon:I was thinking there was a story there with how Scott signed it... Obviously it was not a marker.
Probably just squanched on it.
Quoted from j_m_:I just found out that no. 158 has been held up by my own stupid special request
note to self: do not, I repeat, do not ask scott to sign any more games. I meant to sign it with a marker!!!
and I won't even go into what eric did
Two questions to clear this up:
1. What did Scott sign your playfield with?
2. What did Eric do?
Quoted from jonesjb:Yes, he made it sound more intriguing/out there.
The post is only 2/3rd finished yet! ... can't you see the brackets are waiting to be closed during part 3!
Quoted from jonesjb:Two questions to clear this up:
1. What did Scott sign your playfield with?
2. What did Eric do?
I never kiss and tell.
Quoted from TheNoTrashCougar:I never kiss and tell.
I immediately request my number 500-something have whatever was done
Quoted from Parzival:I immediately request my number 500-something have whatever was done
Should have had him sign all the apron cards so he doesnt have to be there.
Quoted from ripple:I think the flexing piece of plastic is going to need an upgrade or redesign to work long term.
[quoted image]
Not a good sign. Would you know how many plays are on that game for a cycle count?
Quoted from ripple:I think the flexing piece of plastic is going to need an upgrade or redesign to work long term.
[quoted image]
I wonder if a strip of mylar would deaden some of the pressure that leads to the crack?
Quoted from ripple:I think the flexing piece of plastic is going to need an upgrade or redesign to work long term.
[quoted image]
Should have a ramp flap spring steel joint, or have an actual mini hinge with a spring on it.
Quoted from TheNoTrashCougar:I never kiss and tell.
Lipstick. Got it.
Quoted from ripple:I think the flexing piece of plastic is going to need an upgrade or redesign to work long term.
[quoted image]
Looks like this was the second one reported doing that. Add another 2-3 for people who didn’t post, and say 200 machines are out there. (Rounding for simplicity)
That’s a 3% failure rate this soon on the part. I see pinlife sells replacements. I guess stock up!
Does anyone else’s video get super laggy after about an hour of play? It started dropping frames all over the place. I had to reboot the machine a few times to fix it. Maybe a memory leak somewhere? Hopefully fixed in a code update, just wondering if anyone else has seen this?
The upper right flipper even started to half fire a few times.
Quoted from Jherre6:Does anyone else’s video get super laggy after about an hour of play? It started dropping frames all over the place. I had to reboot the machine a few times to fix it. Maybe a memory leak somewhere? Hopefully fixed in a code update, just wondering if anyone else has seen this?
The upper right flipper even started to half fire a few times.
Was it right after Meekseeks MB? If it was it is a bug and be worked on.
Quoted from TomGWI:Was it right after Meekseeks MB? If it was it is a bug and be worked on.
Yep around or after multi ball. That’s what I thought. I’m sure it’ll get fixed, just always happy not to be the only one. Thanks!
Quoted from ripple:I think the flexing piece of plastic is going to need an upgrade or redesign to work long term.
Would be nice too if the top wasn't flat since the ball gets stuck on the top lip a lot which usually requires removing the glass.
Quoted from PinMonk:Should have a ramp flap spring steel joint, or have an actual mini hinge with a spring on it.
Quoted from boustrophedonic:Would be nice too if the top wasn't flat since the ball gets stuck on the top lip a lot which usually requires removing the glass.
Just a change of material can solve it. Shape change, to ease the hangup. Not a big drama, I have some lexan here to use if I have a snap incident...
Quoted from Jherre6:Does anyone else’s video get super laggy
There was a bug in the ending of Meeseeks Mania in the Jerry stuff — it took me a long time to track down, but it’s definitely fixed in the current beta.
Quoted from ripple:I think the flexing piece of plastic is going to need an upgrade or redesign to work long term.
[quoted image]
I just had an idea of a fix for this. I will start working on it and report back for all the owners.
New public build for the weekend. You can grab it on the Spooky game-support page: https://www.spookypinball.com/game-support/
Props to TomGWI for streaming/recording/timestamping issues several times this week over at https://twitch.tv/foxcitiespinball
Build 2020.08.21:
- Added: New display animations for "Jackpot Increased"
- Added: New display for adventure/multiball champs in attract.
- Fixed: THE MEESEEKS MANIA ENDING SLOWDOWN IS FIXED!
- Fixed: If the game tilted during a certain portion of the lock process, the
tilt couldn't finish/clear properly.
- Fixed: Pickle Rick can't be first. Really. For real this time. No Lie.
- Fixed: Game couldn't deal if you drained a ball and locked a ball a
nearly the same time.
- Fixed: Volume level of one of the new Roy narration bits was too low.
- Fixed: With very specific timing, when exiting the service menu, you
could start a game before the attract fully loaded and then
everything is ruined.
Full change log details available at https://soldmy.org/rm_changelog.txt
Quoted from epthegeek:New public build for the weekend. You can grab it on the Spooky game-support page: https://www.spookypinball.com/game-support/
Props to tomgwi for streaming/recording/timestamping issues several times this week over at https://twitch.tv/foxcitiespinball
Build 2020.08.21:
- Added: New display animations for "Jackpot Increased"
- Added: New display for adventure/multiball champs in attract.
- Fixed: THE MEESEEKS MANIA ENDING SLOWDOWN IS FIXED!
- Fixed: If the game tilted during a certain portion of the lock process, the
tilt couldn't finish/clear properly.
- Fixed: Pickle Rick can't be first. Really. For real this time. No Lie.
- Fixed: Game couldn't deal if you drained a ball and locked a ball a
nearly the same time.
- Fixed: Volume level of one of the new Roy narration bits was too low.
- Fixed: With very specific timing, when exiting the service menu, you
could start a game before the attract fully loaded and then
everything is ruined.
Full change log details available at https://soldmy.org/rm_changelog.txt
Starting to wonder if you ever sleep.
Quoted from Coindork:Starting to wonder if you ever sleep.
True Fact : Neil Young actually hired EP to keep the Rust up at night.
Quoted from ripple:The new leaderboard animation is super cool but the Morty is overlapping the score on my machine.
[quoted image]
WTF Morty, you little piece of $#it...
Quoted from ripple:The new leaderboard animation is super cool but the Morty is overlapping the score on my machine.
[quoted image]
The centering logic only looks at the width of the name because it’s USUALLY wider than the score. I’ll update for the next release so it uses the score if that’s larger.
Quoted from epthegeek:The centering logic only looks at the width of the name because it’s USUALLY wider than the score. I’ll update for the next release so it uses the score if that’s larger.
Sorry for using PITA skinny initials but I have been using them for 40+ years.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/aw-jeez-official-rick-and-morty-club/page/104?hl=nysbadmk8 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.