after seeing the fix i decide to try myself with a dremel. What a nightmare !
First i demount the tower and the whole ramp. i removed the optoboard to see where i have to cut the tower. I first dremel the sides and the corner of the back from the tower. It looks so much better, but still not enough ,i had to set the wires of the tower flasher to an other position and voila it fits. I remounted the opto boards and bring everything back in position. i found out that now the connectors of the opto boards hit the tower some dremel correction and then it fits. I mount the ramp back to the playfield, bring back the coil at the top of the ramp and reinstall the tower and now the screw of the towercoil hit the top.
So again time to dremel the top at the middle. After 3 hours of work it fits now perfectly.
if you try to do it yourself, you have to remount the tower ramp otherwise you will not see where to dremel this tower.
not what i expected for such an expensive toy
here are some pictures...
IMG_9924 (resized).JPGIMG_9944 (resized).JPGIMG_9946 (resized).JPGIMG_9947 (resized).JPGIMG_9949 (resized).JPGIMG_9950 (resized).JPG