I just joined the club today with a Pro. I noticed that with a full plunge I can't get it up the ramp, it only goes to the base of the ramp. If I use the auto launch button it will make it up the ramp. My angle is around 6.5% so not insane. Is this how it's suppose to be set up, or should I put a different colored spring in it?

How do you adjust the disc spinner to make it level from all around it? You can’t tell much in the picture but one part is up a bit and is producing huge air balls.

FD763467-111A-40EF-9911-6DEAC8D6B418 (resized).jpeg

Just a shadow from the pic

You need to turn the white gear right above the green line

34731B62-462A-4512-B9E4-2DB0262E908D (resized).jpeg

When trying to obtain the Soul Gem, the Captain Marvel shot needs to be adjusted from Stern. This is shot #6. When I rip my Captain Marvel spinner I can usually get 35 spins off of it. I notice when I'm battling for the Soul Gem when I hit this shot it usually will take 2 shots to complete and move onto shot #7. They need to adjust it maybe down to 20 spins to complete on the Pro. I'm guessing it's set somewhere around 35. The reason I say this is because on the Premium all you need to hit is the ramp shot and any shot that you're hitting solid would go up the ramp so it needs adjusted on the Pro. Please Stern I don't know if anyone else has noticed this?

I've done it with 1 shot maybe 2 times. I know 1 for sure but I've also had about 15+ games where it required 2. My spinner when ripped throws off 30+ spins and I was told that 1 Ramp=30 spins. I'm thinking it might be a tad higher than that but it's close to that.

AIQ pro Ant Man ramp
https://pinside.com/pinball/market/classifieds/ad/174844