I have a A-20516 board from a Safecracker. When I bought the game, I noticed the board leads into R43 were blackened. I replaced the resistor to be safe. I also noticed F602 was blown and replaced that. When I powered the game up - the display had intermittent blinking of the bottom half. After a min or so the resistor I put in actually got hot enough to release itself from the board. Fuse didn't blow. I pulled the board completely out. Any advice on this one?
16623222269115434811416954349194 (resized).jpg16623222611503095963257517132888 (resized).jpg