Looks like it includes a set of legs too. Are the legs actually chrome plated like the rails? If so, that's a steal

I think the last time I bought a set of chrome hardware the legs were around 300 by themselves. This really is a fantastic deal.

At one point pinballife sold the orange set like Buddy's. Not sure who the supplier was but maybe they could do a small batch again.

The rails should have light cycles with streaks of light behind them. The hinges should have a Daft Punk robot on either side.

I did the EL paper myself. I ordered two strips with inverters from a Chinese eBay seller on the cheap. Maybe 1x12, not sure. Then extended the wires with some thin gauge wire, removed the plastic glass channel, ran the wires inside the routed groove. Taped EL strip into place and put everything back together. Put 3-pin connectors on the two inverters and plugged into fts-8. I did not do hinges.

Also if you did the light cycle idea you could have the cycle and light wall in different colors which I think has potential

Or you could have a few recognizers in different colors

End of Line Club is sweeeet