Fairport, NY
Quoted from Lethal_Inc:I’m trying to install the mirror blades and just wondering how the back part of the blade should look around the hinge bolt. The hole in blade is bigger than the bolt so I’m not sure how this holds it in place other than the 3 screws or sticky tape that attach the whole blade. Should this hole be centered on the hinge bolt or slightly catching an edge to hold it in place? If it’s centered the blade will be right below the glass surface barely.[quoted image]
I used only the three screws along the bottom, plus some double sided tape on one side (after one saw I did not need the tape and did not use on the other side). That is about the position of the back box hinge nut on mine as well.
