Quoted from Swoods5688:
Not sure if this has been covered yet in this thread so sorry if this has. I got an AFMr Standard figuring if i really enjoyed it I would sell it and upgrade to an LE, well enter these new Covid prices I needed to figure out a way to make my Standard and LE, Enter where this post comes into use at. After being told from multiple sources that it won't work i figured why not try it for myself so I ordered the XL Display upgrade intended for the MMr. To cut to the short of it I discovered it is 100% possible to make the XL Display work on the AFMr SE and it is extremely easy. I will detail the steps below for anyone wanting to do this on their own game.
1) Follow instructions in display for removing the standard display
2)Once you mount the new display on the pins this is where it starts to differ.
3)You do not need to use the cable adapter that comes with kit but rather uncoil the wires on the top left side and plug the Molex into the connector in the back box
4)Plug the yellow black power wire into the Molex in the back box
5)This next step is to get the Speaker Lights to work RGB with the game, You need to snip the zip tie that is holding the 2 Molex connectors together. You can see in the photos below.
[quoted image][quoted image]
6)Once you have the molex disconnected you are going to run the wires up to the mpu board. You will be plugging this into the upper right Molex that is currently empty
7)Now you can put the DMD/Spearker panel back and get ready to raise the playfield to change out the subwoofer.
8)The current subwoofer is easy to remove just loosen the 4 nuts holding it in, you can now choose how you want to connect the new woofer in, i chose to unsolder the old and solder the new one in
Confirmed that this works! I’ve been holding off on hunting one of these down until I knew for sure it was compatible. Awesome upgrade!