Melbourne
Quoted from eagleeyemma:So this was one of my complaints with the flipper power and did not seem that it was being adjusted when I even put it to min flipper power. I just recently noticed that i have tons of ball dimples all over the playfield due to the air balls non stop. Even with the flipper setting set to min. And leveled at 7.2 degrees I still get the air balls. So I will be setting the flipper strength back to default like told by cgc but my question is now that my playfield has dimples/damage all over the place what/How will this be fixed. New playfield probably not. Kinda disappointed that I paid this kind of money and I have dimples all over the playfield.
Same here after 2nd day of playing this awesome game i find airballs occuring on every game especially after hitting the 2 green standup targets. The playfield looked amazing with a glass finish out of the box even better clearcoat than my mmr but has been battered with over 500 dimples everywhere already. Timber is not the issue. Clearcoat must be a thicker softer finish which is probably a good thing to avoid cracking chipping etc if it was harder. Flippers had to bet set to -15 but after reading post from cgc will set to default again.
Just want to know that this is normal since ive had over 10 nib pinnies but this one takes the cake in clearcoat dimples after one day.
If anyone can confirm that clearcoat coats and finish on this machine has been changed , increased and improved from previous game i can sleep better.
Is it just my game or all have the same issue?
San Diego, CA
Orillia, ON
