Attack From Mars (Remake - Classic)
Chicago Gaming Co., 2017
Attack From Mars (Remake - LE)
Chicago Gaming Co., 2017
Attack From Mars (Remake - Special)
Chicago Gaming Co., 2017
Freddy: A Nightmare On Elm Street
Gottlieb, 1994Just received my eat at eddys mod. For those that have the mod, are the windows fully covered by the white plastic? Seems like the windows should be covered no? Also how did you attach the eat at eddy sign on the roof? tape? I figure asking here might be faster since it usually takes 2-3 days to get a response. Thanks
0E3FAC7A-B897-4755-B70D-41B05B8D9961 (resized).jpeg6D17AEC1-7204-4F42-A1F3-0C4FDC468C29 (resized).jpegF542C10E-324D-4BCD-B41A-C79A14EED860 (resized).jpegMy windows were completely covered. There were 2 tiny squares of double sided foam tape included with mine.
Quoted from punkin:Dunno about that. I've achieved all the objectives to get there now, but i can't see myself doing them all in one game.
Set replay levels, set awards as extra ball.
Your game, your rules, Rule that Universe Bitch!!!!
I have only done it once, but have had the chance several times and just could not get enough points 
Quoted from JohnTTwo:Set replay levels, set awards as extra ball.
Your game, your rules, Rule that Universe Bitch!!!!
I have only done it once, but have had the chance several times and just could not get enough points
Pay attention to the Super Jackpot shot during RTU. Also, the SJ value increases, depending on how many times you've scored it _before_ RTU.
Quoted from Medic:Just received my eat at eddys mod. For those that have the mod, are the windows fully covered by the white plastic? Seems like the windows should be covered no? Also how did you attach the eat at eddy sign on the roof? tape? I figure asking here might be faster since it usually takes 2-3 days to get a response. Thanks
[quoted image][quoted image][quoted image]
Nice mod, where did you get it? Seems like all the ones I find are out of stock.
Quoted from mays876:Nice mod, where did you get it? Seems like all the ones I find are out of stock.
Cointaker has them in stock
Quoted from Medic:Cointaker has them in stock
Mr_Tantrum also makes a nice version of the Eat at Eddy's mod. Send him a PM!
b1dcce75c575137c861c2a21038e38c1e703d9f4 (resized).jpgJust curious, have a remake and the shaker motor is starting to make a slight noise on power off spindown. IOW, it sounds like a small bit of bearing failure. Or is it something else? Has anybody else had this issue and how have you resolved it?
Just got around to installing some of my cliffy protectors. I have a question about the ball drain. It is a compression fit, but the trough comes right up to the edge. Am I supposed to drop the trough and put on the cliffy with compression and then put the trough back basically flattening out the metal of the cliffy protector on the bottom side where the compression is being done?
Quoted from Heavyk:Just got around to installing some of my cliffy protectors. I have a question about the ball drain. It is a compression fit, but the trough comes right up to the edge. Am I supposed to drop the trough and put on the cliffy with compression and then put the trough back basically flattening out the metal of the cliffy protector on the bottom side where the compression is being done?
Yes, that’s how it’s installed. Loosen screws holding trough in, slide cliffy into place, tighten it up.
Quoted from Lermods:Yes, that’s how it’s installed. Loosen screws holding trough in, slide cliffy into place, tighten it up.
Thanks!
Does anyone have a source for florescent green plastic protector sets for AFM/AFMr? Pinbits was the source, but I've read several threads where people say they have gone dark for some time now.
I own a set and looking for a friend. I can easily have a set made, but I was wanting to avoid removing mine and creating the vector files to copy them if I could.
Quoted from Heavyk:Thanks!
I installed a Cliffy drain protector on my AFMr a few weeks ago. One thing that I noticed was that if I centered the protector over the drain, balls would get caught between the end of the protector and the end of the ball drain on the left side. I ended up having to reposition the protector as close to the left side of the drain as possible. I don't know if anyone else has had this problem.
Quoted from reynolds531:I installed a Cliffy drain protector on my AFMr a few weeks ago. One thing that I noticed was that if I centered the protector over the drain, balls would get caught between the end of the protector and the end of the ball drain on the left side. I ended up having to reposition the protector as close to the left side of the drain as possible. I don't know if anyone else has had this problem.
I had the same issue. I had to reposition it also.
Now I'm having an issue with the SOL rear protector - the ball is catching the lip and getting stuck sometimes going through the jets. Such a tight fit there with the mezel mod in place too.
Looks great! I shared how to do this in an earlier post for those who are interested: https://pinside.com/pinball/forum/topic/attack-from-mars-remake-afmr-owners-club/page/189#post-6315268
Quoted from Mr_Tantrum:Looks great! I shared how to do this in an earlier post for those who are interested: https://pinside.com/pinball/forum/topic/attack-from-mars-remake-afmr-owners-club/page/189#post-6315268
Thanks! I had done this on my TNA and Fish Tales also, now that translucent drop targets are available. I add LEDs from Comet to light them up. I use the star post LEDs because they are bright, with 4 LEDs in each cluster, and very thin so easy to tape it beneath the drop target. No doubt people have other good methods.
Has anyone had a problem with the SOL not recognizing the ball?
My SOL worked great for the first 6 months, then got very delayed until the point where if the ball went into it it would have to do a ball search.
CGC replaced the whole SOL (with new optos) and it worked great for another 6 months or so. Now I’m having the same problem again.
Optos are clean, and not picking it up in switch edge test either.
I adjusted the main power supply voltage, re-installed latest code.
I have a ongoing ticket open with CGC, but thought I would check here with other owners to see if anyone had any ideas!
Thanks!
Richard
Here's an idea after you've replaced your martians with Big Jigglys. Take the picture hanger hooks, straighten and form into an L shape. The hooks will fit in the back as the originals. Double sided tape to attach. It's shitty but better than nothing
PXL_20220324_112418177.MP (resized).jpgPXL_20220324_112528220 (resized).jpgPXL_20220324_112619255.MP~2 (resized).jpgQuoted from wtatumjr:Here's an idea after you've replaced your martians with Big Jigglys. Take the picture hanger hooks, straighten and form into an L shape. The hooks will fit in the back as the originals. Double sided tape to attach. It's shitty but better than nothing
[quoted image][quoted image][quoted image]
You should sell these.. you can ask for about tree fitty for them?
Quoted from wtatumjr:Here's an idea after you've replaced your martians with Big Jigglys.
Quoted from Baggerman:You should sell these..
Or you can purchase my 3D printed stands (vertical or slanted) in the color(s) of your choice and I will include adhesive on the bottom if requested for this type of use (mine just sit around the office in various places): https://pinside.com/pinball/forum/topic/attack-from-mars-remake-afmr-owners-club/page/163#post-5431478
pasted_image (resized).pngpasted_image (resized).pngpasted_image (resized).pngpasted_image (resized).pngpasted_image (resized).png
Quoted from wolftownjeff:Or, paint them up and relocate them within the game.
[quoted image]
Now that is truly an attack from Mars!
wtatumjr Thanks....#9925
Get your Big O Jiggly's Martians here.....
https://www.mickspinball.com/big-o-jiggly-martian-add-on
Also Mr. Tantrum's display post/s and his other stuff is great too...
Quoted from R_B85360:Looking for power blades... All four of them! Also looking for ALT acrylic translight. Thanks!
They may have them for sale at TPF today, but you can also get them from Planetary Pinball (PinGraffix is the maker): http://www.planetarypinball.com/mm5/merchant.mvc?Screen=PROD&Product_Code=PPM-PWRBLD-AFM-REMAKE&Category_Code=PINGRAFFIX
Quoted from GreenMachine19:Installed the eat at eddy’s mod from mezel mods. Finally got around to installing the air ball protector as well. Big difference with the ball not launching off the drop target.
[quoted image]
Ohh. I never heard of this air ball protector. Cool!
Quoted from Richard-NBA-SF2:Ohh. I never heard of this air ball protector. Cool!
$20 I believe plus $5 shipping. I bought the green one, which is thick and very well made. The shape and fit is great. I really like the chrome ships from Zitt too.
Quoted from Pinkitten:$20 I believe plus $5 shipping. I bought the green one, which is thick and very well made. The shape and fit is great. I really like the chrome ships from Zitt too.
Where do you get air protector from?
Quoted from Medic:Where do you get air protector from?
Maffewl is the Pinsider who offers them.
F3573ECA-9196-4AA5-AA73-85B6D03539D9 (resized).jpegQuoted from Richard-NBA-SF2:Ohh. I never heard of this air ball protector. Cool!
I’ve had it for awhile but finally got around to this machine for its routine cleaning and waxing. I was on the wait list for the building so when that showed up I just did it all at once. I’m not a huge “mod” guy but the eat at eddys really looks like it belongs there. I feel the same way about the monster fish for FT. I came across this protector and thought it was such a great idea. I never liked how the ball launches off the drop. I’m always worried it’s going to crack an insert. Same with MM when the trolls launch the balls into the glass. I always feel like the glass is just going to explode one day.
Quoted from GreenMachine19:I always feel like the glass is just going to explode one day.
That’s why I replaced my glass with stainless steel. It’s nearly indestructible, but it’s much harder to see anything. 
Hey there.. not sure if any of you AFMr Owners have done this.. but i was having issues with both my orbits not registering rollovers due to "janky" wire rollover forms so i just swapped them out for Magnetic switches from M&M creations, Pinsider name Sonic.
These things are awesome.. every orbit registers now and i have to get used to the increased orbit speed now. fast game is that muych faster now!!
Not a missed orbit yet.
that is my PSA for today!!
Quoted from punkin:Matt makes a great product. have one in my Alice Cooper and one in Sunset Riders on the horseshoe.
It’s great for The Shadow left ramp and Diner coffee cup too. Lots of great locations to speed up the game and replace a micro switch.
Quoted from Baggerman:Hey there.. not sure if any of you AFMr Owners have done this.. but i was having issues with both my orbits not registering rollovers due to "janky" wire rollover forms so i just swapped them out for Magnetic switches from M&M creations, Pinsider name Sonic.
These things are awesome.. every orbit registers now and i have to get used to the increased orbit speed now. fast game is that muych faster now!!
Not a missed orbit yet.
that is my PSA for today!!
Thanks for the endorsement!
Matt
Quoted from Sonic:Thanks for the endorsement!
Matt
Thanks for the great service too mate, you go above and beyond.
Quoted from Richard-NBA-SF2:Has anyone had a problem with the SOL not recognizing the ball?
My SOL worked great for the first 6 months, then got very delayed until the point where if the ball went into it it would have to do a ball search.
CGC replaced the whole SOL (with new optos) and it worked great for another 6 months or so. Now I’m having the same problem again.
Optos are clean, and not picking it up in switch edge test either.
I adjusted the main power supply voltage, re-installed latest code.
I have a ongoing ticket open with CGC, but thought I would check here with other owners to see if anyone had any ideas!
Thanks!
Richard
A update on this: I had a friend “reflow” the solder on my old Opto set for the SOL, hooked that old one up, and it worked in switch edge right away. Set the game up played for a few mins and the sol optos we’re working. Then after just one game, it went dead again. Any ideas?
Thanks,
Richard
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/attack-from-mars-remake-afmr-owners-club/page/199 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Adelaide
Saint John, NB
Prescott, WI