(Topic ID: 192072)

Attack From Mars Remake (AFMr) Owners Club

By Pin_Guy

4 years ago


Topic Heartbeat

Topic Stats

  • 9,735 posts
  • 634 Pinsiders participating
  • Latest reply 2 days ago by mozach
  • Topic is favorited by 290 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

3232C748-86BA-423F-9DF6-51B6631A4398 (resized).jpeg
20211126_171509 (resized).jpg
20211126_171458 (resized).jpg
20211126_094124 (resized).jpg
20211126_093413 (resized).jpg
C8825B95-E75A-42B6-9542-DFE283E3AE86 (resized).jpeg
IMG_6721 (resized).JPG
IMG_6720 (resized).JPG
IMG_6719 (resized).JPG
IMG_6722 (resized).JPG
Backglass.gif
Super Jets.gif
Hallway_3.gif
Hallway_2.gif
Hallway_1.gif
IMG_6625 (resized).JPG

Topic index (key posts)

26 key posts have been marked in this topic, showing the first 10 items. (Show topic index)

There are 9,735 posts in this topic. You are on page 195 of 195.
#9701 52 days ago

Assembling mini saucers are the toughest part. I broke one solder joint on the led rings and had to touch it up. Mount the boards first as the instructions say then plug in and test each saucer before you route the cable under the playfield. Would hate to install it all then see one isn’t working. Lobster ramp needs loosened up to be able to route cables. Hallway leds went in east after removing the main saucer with 2 bolts. Couple hours all in probably by the time you assemble it all then test it out. Kit and instructions were exceptionally well laid out. Even included tape and screwdriver set with replacement screws for areas where stock hardware won’t work with add on led boards. I’ll get a video up when I’m home Monday.

#9702 47 days ago

If anyone is looking to change their line up and have a pristine MBse I'd love to trade for AFMse. Hit me up... I'm in South Carolina and am willing to drive.

#9703 47 days ago

Woo Hoo! Love the mini saucer kit on my SE. Thanks Bill!

Now I just have to decide: Red or Green flashers? The mini LED's are more striking against the darker green caps, but the red caps "glow" a bit with the ambient light when not flashing. Hmmm.

#9704 44 days ago

Howdy! I'm hoping to join the club! If anyone is looking to change their line up and wanting to trade for a MBse give me a shout.
Also could sell mine to pay cash for yours.
I'm in SC and willing to do some driving!
Thanks. Jeff
https://pinside.com/pinball/market/classifieds/ad/122729

#9705 44 days ago
Quoted from EStroh:

Woo Hoo! Love the mini saucer kit on my SE. Thanks Bill!
Now I just have to decide: Red or Green flashers? The mini LED's are more striking against the darker green caps, but the red caps "glow" a bit with the ambient light when not flashing. Hmmm.

Why choose one color? I have a mix of green and red on mine.

#9706 44 days ago

…or use six colors!

611AE6E8-85B1-4DB4-84E1-05DD13D9018F (resized).jpeg
#9707 43 days ago

I have a AFMr classic/standard. I would like to add color-changing lights to the speakers. Anybody recommend a speaker light kit for it? Lermods?

#9708 43 days ago

Hello AFM owners, is there anyone on here skilled at making some custom decals? I really love the Eat at Eddy's mod for the left VUK, but was wondering if anyone had tried a simple custom made decal that would cover the 2 visible sides of the ugly black VUK? This would likely have to be 2 individual decals, but would probably be a whole lot less money than the molded mods available.

I have looked around online for such a thing, but haven't found any. Lots for flippers and drop targets, but no decals to cover the VUK.

#9709 43 days ago
Quoted from OchoFosho:

Hello AFM owners, is there anyone on here skilled at making some custom decals? I really love the Eat at Eddy's mod for the left VUK, but was wondering if anyone had tried a simple custom made decal that would cover the 2 visible sides of the ugly black VUK? This would likely have to be 2 individual decals, but would probably be a whole lot less money than the molded mods available.
I have looked around online for such a thing, but haven't found any. Lots for flippers and drop targets, but no decals to cover the VUK.

If my 3D VUK building is out of your price range, what are your ideas for VUK decals?

AFM.gif
#9710 43 days ago

Just a big time shout out to Bill Ung and UFO Pinball. I ordered his AFM remake Mini saucer LED Plus kit…with the “hallway” lights. Its just a fantastic kit and his customer service is second to none. Had a few sets get damaged in shipment…within 2 business days I had replacements.

A few of the solder joints had cracked/broken and I just could not fix em… the wires are EXTREMELY fragile and my sh#tty soldering set up was causing more damage than good.

Installation was straight forward. Took a few hours total with the majority of time spent getting the leds into the saucers. One tip I would recommend is a dab of hot glue to hold them in place. Friction does not “quite” keep em mounted…at least on my set.

I did a mix of red and green sets as I have both color domes in the ships. Went with green Hallway lights… think it turned out fantastic.

Again, Bill, a big thumbs up and “Thank You” to you sir. It just blows me away what so many talented folks bring to this hobby.

My first attempt at attaching a video to a post… 50/50 if I can figure it out…ha. I can add a few more later if it works.

#9711 42 days ago
Quoted from Mr_Tantrum:

If my 3D VUK building is out of your price range, what are your ideas for VUK decals?[quoted image]

I'm certainly no graphic designer at all, but I was thinking of maybe a simple print of some of the already existing art off of the game itself. Should be very inexpensive and can be removed if desired or even covered over with a 3D model. Plus no wiring keeps things simple.

#9712 42 days ago
Quoted from OchoFosho:

I'm certainly no graphic designer at all, but I was thinking of maybe a simple print of some of the already existing art off of the game itself. Should be very inexpensive and can be removed if desired or even covered over with a 3D model. Plus no wiring keeps things simple.

I’m open to ideas from the group. Not exactly sure what would look best here.

#9713 42 days ago

Any rumours of another run of AFM? I'd like to get a SE but they are pretty scarce here in Ontatio.

#9714 41 days ago
Quoted from Mr_Tantrum:

I’m open to ideas from the group. Not exactly sure what would look best here.

Of course I like your VUK building, especially with my own twist on the billboard…

But I grabbed a few unique building pics to share..

22424DE8-083E-43D1-B9A4-C3D027D7957A (resized).jpeg4A4A67EC-D488-4581-99A6-277156375FAF (resized).pngFBF24359-06E7-4B61-8E69-D88F647951C5 (resized).jpeg
#9715 41 days ago

One of my thoughts were decals that were of the black skyscrapers.

#9716 41 days ago

I had thought to skin the VUK with reflective mylar, hoping that would make the VUK affectively disappear among all the "noise" from nearby lights and objects, etc. Never acted on the idea, but seemed simple enough.

#9717 41 days ago
Quoted from markp99:

I had thought to skin the VUK with reflective mylar, hoping that would make the VUK affectively disappear among all the "noise" from nearby lights and objects, etc. Never acted on the idea, but seemed simple enough.

Adhesive chrome vinyl would achieve this. Or better yet, remove the VUK and chrome spray paint it with SpaxStix paint.

#9718 41 days ago

Future regrets

#9719 40 days ago
Quoted from Mr_Tantrum:

Adhesive chrome vinyl would achieve this. Or better yet, remove the VUK and chrome spray paint it with SpaxStix paint.

Could the VUK be replaced with a wire form? This is a long way from the simplicity of a decal, but might look even better.

#9720 40 days ago
Quoted from OchoFosho:

Could the VUK be replaced with a wire form? This is a long way from the simplicity of a decal, but might look even better.

Why not? Someone would need to design and make them.

#9721 39 days ago
Quoted from OchoFosho:

Could the VUK be replaced with a wire form? This is a long way from the simplicity of a decal, but might look even better.

I doubt having someone design and make a wire form to replace the VUK will be cheap. You are better off just buying the eat at eddys mod at that point and be done with it.

#9722 39 days ago

How cool would it be to have it launch in the air and land on the wire form something like the lock in Houdini.

#9723 36 days ago

I wanted to take the opportunity to post my review of the AFMr UFO Pinball Kit. Since I have the LE, I ordered the full kit for LE Owners (you can see all options here: http://www.ufopinball.com/AFMr-Kit/purchase.htm).

For the version I have, there are three primary features of the kit: 1) Hallway running lights, 2) Super Jets pop lighting effect, and 3) Backglass GI flashing effects.

Since I was one of the early adopters, the installation instructions had not yet been fully documented but I was able to easily follow and perform the installation without any issues. On a technical skill from 1 to 10 I would probably rate the installation a 7, so anyone who is comfortable opening up the backbox, lifting the playfield, and performing a few wire connections and splices should easily be able to implement this mod. I won't get into the install details since these are well document on the UFO Pinball site here: http://www.ufopinball.com/AFMr-Kit/install.htm

Overall, I would give this mod a solid two thumbs up and highly recommend it to any AFMr owner. The mod is well-developed, made of high quality parts, and the support was terrific from UFO Pinball.

Here is the control board installed in my LE backbox with topper - green board at upper left (non LE versions with the UFOs will have a second control board).
IMG_6625 (resized).JPG

The running lights in the hallway are a great effect. They are only illuminated when the forcefield is lowered and attack mode is started. There are a few different patterns that are randomly presented or you can lock in a single pattern if you prefer with a jumper on the control board. Also, there is a special effect when a saucer is destroyed.
Hallway_2.gif
Hallway_1.gif
Hallway_3.gif

The Super Jets effect is also great. I've always wished there was a better visual alert to having the Super Jets activated, and this mod does not disappoint. When Super Jets are activated, the 3 pop lights enter into a chasing pattern and the insert goes dark by default and flashes each time a pop bumper is triggered.
Super Jets.gif

Finally, the backbox lighting is also modified via a couple of simple cable connections. This adds additional flash effects when a saucer is destroyed.
Backglass.gif

1 week later
#9724 29 days ago

Anyone have trouble with their SOL not recognizing the ball?
I had the problem once and the SOL optics would not recognize the ball was in the scoop at all. CGC sent me a full SOL replacement scoop and optic. It worked great for about 6 months. Now the SOL is very delayed again. Taking about 4-6 seconds for the optic to see that the ball is there.
I opened a ticket with CGC but just was curious if anyone had this issue or had it multiple times.
Thanks!
Richard

#9725 28 days ago

Has anyone installed the CPR mirrored back glass on their remake? Will it fit and how does it look? I already have the alternate art translight but was thinking the mirrored one might be pretty awesome. I have the classic edition.

#9726 28 days ago
Quoted from Lethal_Inc:

Had anyone installed the CPR mirrored back glass on their remake? Will it fit and how does it look. I already have the alternate art translight but was thinking the mirrored one might be pretty awesome. I have the classic edition.

Fit fine, I love the look of it.

#9727 28 days ago
Quoted from maffewl:

How cool would it be to have it launch in the air and land on the wire form something like the lock in Houdini.

Like the sneaky lock in CV when the Ringmaster throws the ball onto the high wire ramp. Doesn’t happen often, but my kid loves the animation when it happens.

#9728 22 days ago

I saw in the AFM thread where someone had illuminated their green MARTIAN targets and really liked the look. Unfortunately, these are from a German supplier, and I was going to have to use some end-around shipping method that would put me all-in at over $100 just to order 7 of the LED pads (not even considering any wiring, etc. that I would need or the extending shipping time). Therefore, I started to think about how to accomplish this on the AFM remakes and came up with a custom solution.

What I am offering is a DIY plug-and-play solution to illuminate the green MARTIAN targets on any AFMr pin. This is a combination of sourced parts from a US supplier and a few modifications of my own for a more reliable and simpler installation. I will be doing an initial run of these green target light kits and will be offering in two configurations:

1) Lighting for all 7 green MARTIAN targets: $75
2) Lighting for the 2 center green TI targets: $45

I will provide everything you need for the installation including instructions. Also, the kit will come with a brightness adjuster for setting the brightness just the way you like it (all of my photos are with the lights set at about 50% intensity). My install took about 45 minutes as I was figuring everything out, and it is completely plug-and-play with no wire splicing, cutting, soldering, etc.

For this initial run, I would like to have at least 5 orders and make the cutoff this Thursday at the latest so please PM me if you are interested in purchasing a set. I will not require payment until I lock in everyone and close the initial run. Then I will PM everyone, and they will have 24 hours to pay in order to be included in the run.
IMG_6722 (resized).JPGIMG_6719 (resized).JPGIMG_6721 (resized).JPGIMG_6720 (resized).JPG

#9729 16 days ago

Added speaker light kit from Lermods today! That was the one mod I was really missing (until the amazing LE topper is available someday!) Turned out great and easy install. Next up green trough and shooter lane LEDs…

C8825B95-E75A-42B6-9542-DFE283E3AE86 (resized).jpeg
#9730 15 days ago

I'm doing another Group Buy from Pinball.Center for the chrome saucers.
I underestimated the demand for the large saucers the first time.
If you think you might want to get the large chrome saucer; please direct message me so I'm sure to get enough to fill demand.

#9731 11 days ago

And I wake up to this..Happy Thanksgiving weekend!!!

Love my grandkids!!
20211126_093413 (resized).jpg

20211126_094124 (resized).jpg

And into the evening...crazy!!

20211126_171458 (resized).jpg20211126_171509 (resized).jpg
1 week later
#9732 5 days ago
Quoted from MK6PIN:

And I wake up to this..Happy Thanksgiving weekend!!!
Love my grandkids!!
[quoted image]
[quoted image]
And into the evening...crazy!![quoted image][quoted image]

Kids allways starting four player games!!!

#9733 5 days ago
Quoted from butterz:

Kids allways starting four player games!!!

And walking away with a ball still sitting in the shooter lane.

#9734 4 days ago
Quoted from RTS:

And walking away with a ball still sitting in the shooter lane.

Brother-in-laws do the same thing! So weird LOL

#9735 2 days ago

In the club! I’ve had the original a couple of times. But first remake. Love it.

3232C748-86BA-423F-9DF6-51B6631A4398 (resized).jpeg
There are 9,735 posts in this topic. You are on page 195 of 195.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside