i am in the club! Anybody installed on AFM LED OCD board?
You're currently viewing posts by Pinsider vbobrusev.
Click here to go back to viewing the entire thread.
Quoted from bballfan:Looks great vbobrusev!
Do you have any pics of it installed?
Not yet. I am restoring playfield. Will post it when I am finish my restore project
Hi! I have 2 issues on my AFM.
First it's very flickering LED in my backbox on Green and White-Green chanel. Other LED's in Backbox not flickering...
Second, after clearing inside backbox DMD not showing data. i think ribbon cable is die... but all wires beep's. also i beep ribbon cables from CPU, they good too... Sound working fine, but no image on DMD. looks like no data on ribbon cable.
Any ideas?
Quoted from Blitzburgh99:Where can a fella get one of these?
here ebay.com link: Attack from Mars pinball Bally Playfield backboard decal
Today I will start make blades in style of backboard, who interested pm me, I will let you know when it will be ready
So finally my attack from mars restored... Condition was 3/5 when i got it. Many small things to fix.
IMG_7889 (resized).JPG
Playfield was scratched until wood in few spots
ydqVfIJjQsg (resized).jpg
Wwl0AaKGraM (resized).jpg
zqPxHSeFAqI (resized).jpg
Remove old decals
IMG_8025 (resized).JPG
Clean and paint inside cabinet
IMG_8337 (resized).JPG
New decals on cabinet. I used PPS decals. As display i used Pin2dmd with my colorization for this game.
(resized).jpg
DSC09997 (resized).jpg
Playfield was fully restored and reclearcoated.
DSC00009 (resized).jpg
DSC00010 (resized).jpg
All Rubbers was replaced and i put LED everywhere.
DSC00003 (resized).jpg
And as result it looks gorgeous
DSC09990 (resized).jpg
Right now i am working on side blades for this game in style as i made backboard decal.
Quoted from Mageek:How much $ ?
NVm I see them on your ebay page for $90
sales out ebay cheaper - direct sale 80$ for blades 100$ for bundle blades + backboard decal. All prices include shipping. Ships in tube
Quoted from Pinball13:Anyone here??......Crickets
remove old leds and solder new on in same position.
they will have flat surface on LED like on picture - it's cathode "-"
Quoted from Blitzburgh99:Where Can I get one of these? Can’t find in stock anywhere.
i saw it on ebay
Quoted from Blitzburgh99:Some of the sockets in backbox have the tabs snapped off. Best place to purchase?
I replaced mine on pinballlife
Quoted from arqpuebla:Dear AFM owners.
Could some one tell me where this cable starts?
The ground braid attached one end to the back plate in the picture. Where it starts?
Thanks for any help
as i remember it's starts on power plug socket in cabinet.
Have issue with my anypin nvram - they don't save time. Any ideas how to fix it? or i need to put battery for save time?
Quoted from rx3:This is why I don't use nvram.
i don't know about this. it's important for AFM and other games where saves date and time for leaderboards.
Quoted from ParisPinballAdct:And so I placed an order for an ColorDMD display
you can buy pin2dmd it's cheaper and almost the same.
This Sunday in 11:00am GMT-5 will be playing in Attack from Mars. https://www.twitch.tv/pinballrussia Will be glad if you guys will be with us.
Quoted from allsportdvd:I’ve just bought a nice original AFM
Can I get the groups opinion of the following?
Target decal set - best ones?
Backboard decal?
Is the 3D translite worth getting?
Saucer mods?
Any other mods that are a must?
Hi! i have target decals, side and backboard decals.
Quoted from allsportdvd:Which ones though? There are couple of different ones and not certain which design is best
ebay.com link: itm
ebay.com link: itm
ebay.com link: itm
ebay.com link: itm
ebay.com link: itm
Dm me if you need something. Discounts for pinsiders available
Quoted from allsportdvd:And here are some pics with the vbobrusev art blades and backboard decal installed.[quoted image][quoted image][quoted image]
Hope you like it
Hi guys! I am selling that backboard decal and side blades and a lot of things for pinball. Who interested to buy it, send me a message. I will provide small discount on sales outside of eBay.
Quoted from Pinhead1982:vbobrusev what do your side art look like!?
https://pinside.com/pinball/forum/topic/attack-from-mars-afm-martians-welcome/page/11#post-4943488
They made in style of backboard decal. Maybe not a best quality picture. but you can see when they installed.
Pin2dmd colorization for real pins was updated, who requested files early, please re download your personal link
You're currently viewing posts by Pinsider vbobrusev.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/attack-from-mars-afm-martians-welcome?tu=vbobrusev and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.