Hi!
First post in this club. I am starting a restore on my AFM. I have had it for 12 years and have never wanted to let it out of the lineup but it has started to wear down and some DMD issues are starting so I will have to rebuild the A/V board so thought what the heck ....I have had the stuff to do this accumulated for years.
Anyway, I have found a few head scratchers in the cab wiring that I thought I would work through while I'm working on the cabinet. Because I am looking at the power blades I noticed that my DBV connectors have been modified to hardwire in a non-factory connector. I am hoping one of you who have a USA game can post a few pictures of the original harness from the voltage jumper plug to the DBV plug. What I need is what the connector looks like and some physical pictures to match up with the schematic which I have.
Thanks for any help, I have included a pic of the current wiring which is electrical taped to the coin door. No hurry, I have a lot to do before I bring the game inside to work on this and the boards. But thought I would start the questions.
Also included a pic of the fade that started the motivation for restore. Although the playfield is worse but shoots really well.
Kenny
IMGP1656 (resized).JPGIMGP1684 (resized).JPG