Working on a Atlantis the white even targets and rollovers are not scoring. Looking at the schematics I have checked the motor 2c switch along with The 500 point blue drop target relay, and they seem to be working properly any advice and help would be greatly appreciated TIA.

6916CC3E-AE17-419A-B37E-CBED3B0C7BFB (resized).jpeg

2F35DC8C-9AA3-49C8-B092-F2A076E3CA11 (resized).jpeg

Mark,
Assuming this is #1 c stack one open five closed seem to be clean and making contact.

4B7FE03B-78E3-44BE-8F1A-109939856CCA (resized).jpeg

The only red and white I could find was on the 4c stack and no change.

52CB918E-C3EA-4284-B5EB-A8A6618197EF (resized).jpeg

This says motor 1c fifth switch opens circuit to white drop targets yellow rollovers. Should be just that easy

92838417-A390-4F92-BFC2-362951F5A79B (resized).jpeg

Found this red white coming into the B stack number one motor switch, jumped it over to the blue leg C relay and no reaction.

16C718E4-05F3-4F21-9CB4-47842CE0ABDC (resized).jpeg

Problem Solved found a loose ground connection to the C relay coil . Thank you for your help Mark
Onto the next issue.