Finally getting around to working on my Atari Middle Earth prototype pinball machine. Machine does not work of course. Looks like it has had some wiring done to it plus some pcb work. I did a video of it showing what it does when I turn it on and off and back on again. I checked all connections and cleaned all the edge connectors. As well as the socketed chips on the pcb. I have 5 volts on the board and 14.96 going into it. I am wondering if it is a board issue or something else that is causing the issue from the wiring that was messed with. Also thought about the big capacitors in the back of machine, but they look like they may have been replaced. From looking at other pictures of other machines the big capacitors that look original on the other machines are silver colored. Any thoughts or help would be greatly appreciated. Here is link on video