Mata Hari
Bally, 1978You're currently viewing posts by Pinsider jethrop.
Click here to go back to viewing the entire thread.
Have MPU that boots fine on the bench but only a flicker (LED) in the machine. Have all correct voltages in the machine and have 5V and 12V on the MPU board in the machine. Why would it not boot fine in the machine with the correct voltages on the MPU but fine on the bench? The board is jumpered for 2732 ROMs and they are new.
Thank you Quench. I never would have figured out what was up with that. The vendor is providing a new set of ROM's being programmed with the information you provided.
You're currently viewing posts by Pinsider jethrop.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/as-2518-35-boots-on-bench-but-not-in-machine?tu=jethrop and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fredericksburg, VA