There seems to be a flange along the bottom which I guess will cause them to not sit flush with the playfield. Grind it flat if you can't adjust the height.
Yeah, mine had that too. However, the piece that the drop targets rest on is "adjustable"
The adjustable piece is only connected on the outside, and the area that the drop targets stop on is bendable with a pair of pliers.
I had the exact same issue with mine, but between the slotted holes in the bracket, and the bendable piece, I had to do no modifications to the drop targets.
Quoted from djblouw:Yeah, mine had that too. However, the piece that the drop targets rest on is "adjustable"
The adjustable piece is only connected on the outside, and the area that the drop targets stop on is bendable with a pair of pliers.
I had the exact same issue with mine, but between the slotted holes in the bracket, and the bendable piece, I had to do no modifications to the drop targets.
Hmmm....interesting. Any pics?
Quoted from djblouw:Yeah, mine had that too. However, the piece that the drop targets rest on is "adjustable"
The adjustable piece is only connected on the outside, and the area that the drop targets stop on is bendable with a pair of pliers.
I had the exact same issue with mine, but between the slotted holes in the bracket, and the bendable piece, I had to do no modifications to the drop targets.
Thank you so much for pointing this out!
literally a 2 second fix!
Quoted from grh450:Thank you so much for pointing this out!
literally a 2 second fix!
Yep, no problem. Sorry about the lack of pics being sent. My phone takes terrible pictures, so I have to get out the digital camera, which never has a charged battery
All of the drop target banks have this same adjustment, although the single one is just slightly more difficult, due to the housing assembly. But it can still be adjusted.
Emperor Ming awaits!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/arrrrggghh-flash-gordon and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.