Looking good. Nice to see another local working on restorations
You're currently viewing posts by Pinsider bigguybbr.
Click here to go back to viewing the entire thread.
Quoted from Silverstreak02:I sanded everything to flatten the surface. I also added white and black details to the rocket and the two planes. Next is adding more white details and correcting the last of the key lines.
[quoted image]
That's looking great. Glad you have found your way back to this project.
Quoted from Silverstreak02:I added some white details and sprayed another can of Spraymax.
How is spraymax working for you down here in the Tampa area? I get a fair amount of orange peel because I find it sets up pretty fast before it has a chance to really flow and level out. I end up spraying an extra coat and sanding till I get it where I want, but I was curious about your results.
Quoted from Silverstreak02:I’ve been looking forward to adding these decals.
[quoted image]
This will be beautiful when it’s done
Quoted from Silverstreak02:My first attempt at making a plastic. Unfortunately they aren’t available so I had to try. It’s not perfect, but close enough.
[quoted image]
[quoted image]
[quoted image]
That turned out great. Is that a water slide decal onto Lexan?
Quoted from Silverstreak02:I finished the bottom board and it’s ready to be installed. I disassembled most everything and painted the metal parts. All the switches were cleaned and gapped when needed. I replaced the power cord and added an on/off switch. I also replaced the labels. Here is a before and after picture.
[quoted image][quoted image]
Looks great!
You're currently viewing posts by Pinsider bigguybbr.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/around-the-world-project?tu=bigguybbr and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.