I'm getting the feeling that the factory art blades on the JP2 LE are not available for purchase. I'm been searching & find plenty of options & even a Stern set but none are the ones on the LE. here are a couple pics of the set I'm looking for. I don't see them anywhere. is this something you can buy?
unnamed (1) (resized).jpg
unnamed (resized).jpg
JurassicPark-LE-Details-12 (resized).jpg
JurassicPark-LE-Details-27 (resized).jpg

since I'm searching / making a shopping list for my wife to look at, I figured I might as well share them all here.

here are the official Stern ones. it's a close up of the clever girls eye
https://shop.sternpinball.com/products/jurassic-park-inside-art-blades
JP_art_blades_2_1070x1070_crop_center (resized).png

these are nice looking & very similar. has the jeep instead of the pickup.
https://www.retrorefurbs.com/shop/jurassic-park-stern-pro-pinball-sideblades/
jurassic-park-stern-pro-pinball-sideblades-inside-decals-sideboard-art-pin-blades (resized).jpg

these look nice too
https://www.pingraffix.com/product-page/stern-jurassic-park-pinblades
ae11fd_2fae3c0790994eb99f027f04fd77680c_mv2 (resized).png

then there's this animated version of them
https://www.pingraffix.com/product-page/jurassic-park-pinball-powerbladez

so far these are my favorite but still would really like to see the LE set. I assume I'll end up owning these.
https://www.tiltgraphicsinc.com/product-page/jurassic-park-stern-gameblades
Image g1 (resized).png

does anyone have this tilt graphics set? the fence & dinosaurs look clear but the jungle looks blurry for some reason. wish I could find a video or other pics showing these blades.
Image g1 (resized).png

yes, I've been looking at these. the colors are right & it's a real similar style.

I really like the tilt graphics fence one. love all the little signs & how the fence is broken right at the raptor pit. really fit the table well but when I look a the trees it almost looks like they applied an art filter on use a lot of clone brush. i'm gonna hold off till I see some other pics or a video of a table w/ those installed.

when I installed the stern B&W blades on my Munsters, I just put them on dry & had absolutely no problems. painters tape to hold it in place and then peeled the backing off a little at a time. was even able to pull it off / re-apply it one time when I didn't like how it was laying. thing was stiff enough that bubbles weren't even an issue. I used a rubber squeegee thing used for window tint just to be safe but I don't know that it even did anything.

thanks, I like how the fence appears to line up w. the gate in the back. these will be the ones I order. funny that I'm all worried about addons cause my machine doesn't even get here till tomorrow.

like your pterodactyl / pteranodon over the spiral ramp. I got 1 in my Amazon cart but dragging my feet so I can measure the ramp & get an idea on the size I'd need.